User manual SONY CYBER-SHOT DSC-P32

[. . . ] 3-082-146-11(1) Getting started ________________________ Digital Still Camera Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Shooting still images __________________ Viewing still images ___________________ Deleting still images ___________________ Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. DSC-P32/P52/P72 Serial No. Before advanced operations _____________ Advanced still image shooting ____________ Advanced still image viewing_____________ Still image editing ______________________ Enjoying movies________________________ Enjoying images on your computer ______ Troubleshooting ________________________ Additional information ___________________ DSC-P32/P52/P72 © 2003 Sony Corporation Index _____________________________ WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-SONY (7669) The number below is for the FCC related matters only. [. . . ] g Select [OK] with v , then press z. The movie is cut. Enjoying movies To cancel cutting In Step 5 or 7, select [Exit]. The movie appears on the screen again. 77 Enjoying images on your computer Copying images to your computer ­ For Windows users Recommended computer environment OS: Microsoft Windows 98, Windows 98SE, Windows 2000 Professional, Windows Millennium Edition, Windows XP Home Edition, or Windows XP Professional The above OS must be installed at the factory. Operation is not assured in an environment upgraded to the operating systems described above or in a multi-boot environment. CPU: MMX Pentium 200 MHz or faster USB connector: Provided as standard Display: 800 × 600 dots or more High Color (16-bit color, 65 000 colors) or more · If you connect two or more USB equipment to a single computer at the same time, some equipment, including your camera, may not operate depending on the type of USB equipment. · Operations are not guaranteed when using a USB hub. · Operations are not guaranteed for all the recommended computer environments mentioned above. USB mode There are two modes for a USB connection, [Normal] and [PTP]* modes. The factory setting is the [Normal] mode. * Compatible only with Windows XP. When connected to a computer, only the data in the folder selected by the camera is copied to the computer. To select the folder, follow the procedure on page 61. x Image Transfer This application is used to easily transfer images from the camera to a computer. x ImageMixer This application is used to display and edit images that are stored in a computer. · This section describes the procedures using Windows Me as an example. The required operations may differ depending on your OS. · Close down all applications running on the computer before installing the USB driver and application. · When using Windows XP or Windows 2000, log on as Administrators. · The display settings should be 800 × 600 dots or more and High Color (16-bit color, 65 000 colors) or more. When set to less than 800 × 600 dots or 256 colors or less, the install title screen does not appear. Communication with your computer When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time. When a USB connector is not provided on your computer When neither a USB connector nor a "Memory Stick" slot is provided, you can copy images using an additional device. http://www. sony. net/ Contents of the CD-ROM x USB Driver This driver is needed in order to connect the camera to a computer. When using Windows XP, you need not install the USB driver. 78 Installing the USB driver When using Windows XP, you need not install the USB driver. Once the USB driver is installed, you need not install the USB driver. c Click [USB Driver] on the title screen. e Click [Yes, I want to restart my computer now], then click [Finish]. a Turn on your computer, and insert the supplied CD-ROM into the CD-ROM drive. Do not connect your camera to your computer at this time. If it does not appear, double-click (My Computer) t [ImageMixer] in that order. The "InstallShield wizard" screen appears. Enjoying images on your computer d Click [Next]. When the "Information" screen appears, click [Next]. Your computer restarts. [. . . ] 50 Image size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 25, 101 Inserting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Number of shooting images . . . . . . . . . . . . . . . . . . . . . . . . 25 Picture effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]