User manual SONY CYBERSHOT DSC-T1

[. . . ] 3-085-733-12(1) Getting started_________________________ Digital Still Camera Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Shooting still images___________________ Viewing still images ____________________ Deleting still images ___________________ Before advanced operations ______________ Advanced still image shooting ____________ Advanced still image viewing _____________ Still image editing _______________________ Enjoying movies ________________________ Enjoying images on your computer__________ Troubleshooting ________________________ Additional information____________________ Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. DSC-T1 Serial No. DSC-T1 © 2003 Sony Corporation Index __________________________________ WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-SONY (7669) The number below is for the FCC related matters only. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When copying is complete, "ImageMixer" automatically launches and images appear. -- Windows XP Connect the camera and your computer with the USB cable and the USB cradle. "Image Transfer" starts up automatically and the images are automatically copied to the computer. Windows XP is set so that the OS AutoPlay Wizard activates. If you want to cancel the setting, follow the procedure below. a Click [Start], then click [My Computer]. Double-click here 2 Click (Sony DSC), then click [Stop]. 3 Confirm the device on the confirmation screen, then click [OK]. Step 4 is unnecessary for Windows XP users. 5 Disconnect the USB cable, remove the "Memory Stick Duo" or turn off the power. For Windows 98 or 98SE users · Normally "Image Transfer" and "Date" folders are created inside the "My Documents" folder, and all of the image files recorded with the camera are copied into these folders. · You can change the "Image Transfer" settings (page 81). b Right-click [Sony MemoryStick], then click [Properties]. c Cancel the setting. 1 Click [AutoPlay]. 3 Check [Select an action to perform] under [Actions], select [Take no action], then click [Apply]. 4 Set [Content type] to [Video files] and proceed step 3. Set [Content type] to [Mixed content] and proceed step 3. The OS AutoPlay Wizard does not start up automatically even if the USB connection is made next time. Confirm that the access indicators (page 79) on the LCD screen are turned white and carry out only step 5 above. 80 Changing "Image Transfer" settings You can change "Image Transfer" settings. Right-click the "Image Transfer" icon on the tasktray, select [Open Settings]. The settings you can set are as follows: [Basic], [Copy], and [Delete]. Copying images without using "Image Transfer" -- Windows 98/98SE/2000/Me If you do not set to launch "Image Transfer" automatically, you can copy images as following procedure. When an image with the same file name exists in the copy destination folder The overwrite confirmation message appears. When you overwrite the existing image with the new one, the original file data is deleted. To change the file name To copy an image file to the computer without overwriting, change the file name to the desired name. However, note that if you change the file name, you may not be able to play back that image with your camera. To play back images with the camera, perform the operation on page 85. a Double-click [My Computer], then double-click [Removable Disk]. The contents of the "Memory Stick Duo" inserted in your camera appear. · This section describes an example of copying images to the "My Documents" folder. · When the "Removable Disk" icon is not shown, see page 82. · When using Windows XP, see page 82. Right-click here Enjoying images on your computer When the "Image Transfer" starts, the below window appears. b Double-click [DCIM], then double-click the folder which contains the desired images. The folder opens. When you select [Settings] from the above window, you can only change the [Basic] setting. c Right-click the image, then click [Copy]. d Double-click the "My Documents" folder. Right-click the inside of the folder, then click [Paste]. The image files are copied to the "My Documents" folder. 81 When a removable disk icon is not shown 1 Right-click [My Computer], then click [Properties]. [. . . ] 35 Slide show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Smart Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Speed priority burst . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Spot AF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]