User manual SONY CYBERSHOT DSC-U10

[. . . ] 3-076-559-14(1) Digital Still Camera Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Getting started _________________________ Shooting still images ___________________ Viewing still images ____________________ Enjoying movies _______________________ Deleting images ________________________ Copying images _____________________ Troubleshooting _______________________ Additional information __________________ Index Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. DSC-U10 Serial No. DSC-U10 © 2002 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Never remove the "Memory Stick" or disconnect the USB cable at this time, as the data may be damaged. 3 "USB MODE: NORMAL " appears on the LCD screen. When a USB connection is established for the first time, your computer automatically runs the used program to recognize your camera. Wait for a while. · If "USB MODE: NORMAL" is not shown in step 3, confirm that [USB] is set to [NORMAL] in [ ] (page 89). · In USB mode, the POWER button, lens cover and other controls on the camera do not function. For Windows 2000, Me, or XP users 1 Double-click on the tasktray. Copying images 2 Click (Sony DSC), then click [Stop]. 3 Confirm the device on the confirmation screen, then click [OK]. This step is unnecessary for Windows XP users. 5 Disconnect the USB cable or remove the "Memory Stick. " For Windows 98 or 98SE users Do only step 5 above. 69 4 Copying images · You can change the "Image Transfer" settings at the SETUP screen. · When using Windows XP, see page 72. Copying images without using "Image Transfer" If you do not set to launch "Image Transfer" automatically, you can copy images as following procedure. a Double-click [My Computer], then double-click [Removable Disk]. If the checkbox is checked on the "Image Transfer Settings" screen in step 9 on page 63, "Image Transfer" automatically launches during USB connection and the images are copied. When copying is complete, "ImageMixer" automatically launches and a list of images appears. When "Image Transfer" does not launch automatically, double-click the "Image Transfer" icon in the tasktray to launch "Image Transfer. " · Normally "Image Transfer" and "Date" folders are created inside the "My Documents" folder, and all of the image files recorded with your camera are copied into these folders. The contents of the "Memory Stick" inserted in your camera appear. · This section describes an example of copying images to the "My Documents" folder. · When the "Removable Disk" icon is not shown, see page 71. b Double-click [DCIM], then double-click [100MSDCF]. The "100MSDCF" folder opens. · The "100MSDCF" folder contains the still image files you shot using your camera. · The folder names vary depending on the type of images they contain (page 74). 70 c Drag and drop the image files into the "My Documents" folder. The image files are copied to the "My Documents" folder. · When you try to copy an image to a folder in which an image with the same file name is stored, the overwrite confirmation message appears. When you want to overwrite the existing image with the new one, click [Yes]. In this time, the original one is deleted. When you do not want to overwrite it, click [No], then change the file name. When a removable disk icon is not shown 1 Right-click [My Computer], then click [Properties]. The "System Properties" screen appears. 2 Confirm if other devices are already installed. 3 Confirm if there is a " Sony DSC" or " Sony Handycam" with a mark. 3 If you find either of the devices above, follow the steps below to delete them. 1 Click [ Sony DSC] or [ Sony Handycam]. The "Confirm Device Removal" screen appears. Try the USB driver installation again using the supplied CD-ROM (page 58). Copying images 71 4 Copying images Copying images using "Image Transfer" Windows XP is set so that the OS Auto Playback Wizard activates. [. . . ] 40 POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Power batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 ON/OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]