User manual SONY CYBERSHOT DSC-P50

[. . . ] Thank you for purchasing this Sony Compact Disc Player. You can enjoy its various features even more with: · CD-R/CD-RW which can have a session added can be played (page 7). ) can be played, depending on the recording method (page 7). Optional controller accessories Card remote commander RM-X114 Rotary commander RM-X4S *1 This unit works with Sony products only. [. . . ] Scanning stops when the unit receives a station. Turn the SEEK/AMS control dial until the desired station is received. Local Seek Mode: If the automatic tuning stops too frequently, press (SENS/BTM) repeatedly until "LOCAL-ON" appears. Turn the SEEK/AMS control dial to tune in the station that you want to store. Press the desired number button ((1) to (6)) until "MEM" appears. Note If you try to store another station on the same number button, the previously stored station will be erased. Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, turn the SEEK/AMS control dial until the desired frequency appears (manual tuning). Press the number button ((1) to (6)) on which the desired station is stored. During radio reception, press (SENS/BTM) repeatedly until "MONO-ON" appears. FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio programme signal. For example, one of the following will be displayed upon receiving a station with RDS capability. The alternative frequencies (AF) function allows the radio to always tune into the area's strongest signal for the station you are listening to. The unit starts searching for an alternative station with a stronger signal in the same network. If "NO AF" flashes, the currently tuned into station does not have an alternative frequency. Receiving traffic announcements, even when enjoying another programme/source. Depending on the country or region, not all of the RDS functions are available. RDS may not work properly if the signal strength is weak or if the station you are tuned to is not transmitting RDS data. If you want to change the on/off setting while playing a CD, press (AF). When there is no alternative frequency in the area or when you do not need to search for one, turn the AF function off by selecting "AF-OFF. Turn the SEEK/AMS control dial while the station name is flashing (within 8 seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI SEEK" appears). [. . . ] The SEEK starts after a few seconds of listening. The station does not broadcast any traffic announcements despite being TP. (For this unit and optional CD/MD changers) The following indications will flash for about 5 seconds, and an alarm sound will be heard. A CD cannot play because of some problem. [. . . ]