User manual SONY D-368

[. . . ] The area code of the Discman you purchased is shown on upper left of the bar code label on the package. For accessories supplied with your Discman, check the area code of your model and refer to "Supplied accessories" toward the end of this manual. If you want to play a CD right now, choose to use your Discman on house current. Other choices are the following three: rechargeable battery, dry batteries (see "Power Sources" on the reverse side) and car battery. [. . . ] Press REPEAT/ENTER while the track you want is playing. To skip the track, press + or just wait for the next track. To cancel RMS play, press PLAY MODE until "RMS" disappears. During programming: Press REPEAT/ENTER before step 5. During RMS play: Press PLAY MODE repeatedly until "RMS" flashes, then press REPEAT/ENTER. Each time you press REPEAT/ENTER, the track number and the playing order appear in the order you specified. If you program another track after the 22nd track, the first track programed is cleared and the new track is programed instead. After you have gone through the CD, "INTRO PGM" stops flashing and the tracks you have chosen play automatically. To finish programming before going through the whole CD, press ^. To cancel INTRO PGM play, press PLAY MODE repeatedly until no play mode is indicated in the display. If the sound is distorted when you listen to the bass-boosted sound with the AVLS function, turn down the volume. To resume playing from the point you stopped the CD (Resume Play) Normally, every time you stop and play, playing starts from the beginning of the CD. The resume play function, however, let you listen to from the point at which you last turned off the Discman. You can use your Discman in a car as illustrated below. Charge the rechargeable battery before using it for the first time. You can use either BP-DM10 or BP-DM20 rechargeable battery for this unit. You can use them in the same way, but their charging time and battery life are different. Check the model number of your rechargeable battery, and use it. To connect your Discman to a car cassette deck, you need the following accessories: · Car battery cord with car connecting pack DCC-E26CP Refer to the instruction manual of each accessory for details. Even if RESUME is set to ON, playing starts from the beginning when you open the lid. The resume point may be inaccurate by about 30 seconds. Insert two LR6 (size AA) alkaline batteries by matching the ` and ' to the diagram inside the battery compartment and close the lid. [. . . ] Should any problem persist after you have made these checks, consult your nearest Sony dealer. The CD does not play or "no dlSC" appears in the display though a CD is placed in the unit. Leave the unit aside for several hours until the moisture evaporates. M Make sure the batteries are inserted correctly. [. . . ]