User manual SONY D-E800

[. . . ] To cancel shuffle play, press PLAY MODE repeatedly until no play mode is indicated in the display. To resume playing from the point you stopped the CD (Resume Play) J Normally, every time you stop and play, playing starts from the beginning of the CD. The resume play function, however, lets you listen to from the point at which you last turned off the player. If you want to play a CD right now, choose to use your player on house current. [. . . ] You can use the NH-DM2AA rechargeable battery for this player. You cannot use any other rechargeable batteries. You can play track repeatedly in normal, INTRO PGM, shuffle or RMS (Random Music Sensor) play modes. Repeat all the tracks or only one track. Resume play after pause Find the beginning of the current track (AMS*) Find the beginning of the previous tracks (AMS) Find the beginning of the next track (AMS) Find the beginning of the succeeding tracks (AMS) When you connect the player to a MiniDisc recorder, DAT deck, etc. Insert two rechargeable batteries by matching the ` and ' to the diagram inside the battery compartment and close the lid. Hours) When using NH-DM2AA (charged for about 4 hours*) Two alkaline batteries ESP function off on 12 11 To cancel RMS play, press PLAY MODE until "RMS" disappears. 5 Press ^ on the player to release pause. Connect the optical digital connecting cord while the player is in stop mode. ⷠIf you record without pausing the player, some CD may have problem with recording the first track number correctly. ⷠSOUND function works on output from the 2/ REMOTE jack, but does not work on optical digital output from the LINE OUT (OPTICAL) jack. To repeat a single track = repeatedly** 1 Press REPEAT/ENTER while the track you want to repeat is playing. During programming: Press REPEAT/ENTER before step 5. During RMS play: Press PLAY MODE repeatedly until "RMS" flashes, then press REPEAT/ENTER. Each time you press the button, the track numbers appear in the order you specified. (When you use the player on a flat and stable place; When you do not use the optical digital connecting cord) *Charging time varies depending on how the rechargeable battery is used. Take out the batteries in the proper way as illustrated inside the lid or shown below. Using other functions Playing only the tracks you want (INTRO PGM play) C You can choose and play your favorite tracks by scanning through the beginning of each track in a CD. When the battery becomes weak, indication appears in the display. To keep the original battery capacity for a long time, recharge the battery when the battery is used up (discharged). The ESP (Electronic Shock Protection) function prevents the sound from skipping by using a buffer memory that stores music data. The new ESP2 (ESP Squared) system can store more music data in the buffer memory, and the frequency of sound skipping has been decreased. [. . . ] (This function is not possible with some cars depending on the model. When you press ^ (when RESUME is set to OFF), the total number of the tracks in the CD and the total playing time appear for 2 seconds. ⷠDuring play, the track number and the elapsed playing time of the current track appear. ⷠBetween the tracks, the time to the beginning of the next track will appear with the "­" indication. [. . . ]