User manual SONY D-E900

[. . . ] To avoid accidental operation of the player, slide HOLD on the player in the direction of the arrow. When you press any button, the HOLD lamp flashes and you cannot operate the player. (You can still operate the player with the remote control. [. . . ] The resume play function, however, lets you listen to from the point at which you last turned off the player. Press = side of the ( button once = side repeatedly = side once + side repeatedly Hold down + side Hold down = side Find the beginning of the current track (AMS*) Find the beginning of the previous tracks (AMS) Find the beginning of the next track (AMS) Find the beginning of the succeeding tracks (AMS) Go forward quickly When you charge spare rechargeable batteries just after finishing the charging of the supplied batteries Disconnect the plug of the AC power adaptor from the DC IN 4. 5 V jack , and change the rechargeable batteries. Then, connect the plug of the AC power adaptor to the DC IN 4. If the OPR/CHG lamp does not flash, do the above procedure again. If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times. â· If the battery life becomes shorter by about half, replace it with Sony NH-14WM rechargeable battery or the rechargeable battery listed in the recommended accessories. Do not use any other rechargeable battery. You can turn off the beep that sounds as you operate your player. Disconnect the power source (AC power adaptor, rechargeable battery or alkaline batteries). While you press and hold down p on the main unit, connect the power source again. To make the beep sound again, disconnect the power source, and then connect it without pressing p. When you go through the CD, "INTRO PGM" stops flashing and the tracks you chose play automatically. To finish programming before hearing through the CD, press PLAY MODE. The tracks you have chosen play automatically. To cancel INTRO PGM play, press PLAY MODE until no play mode is indicated in the display. [. . . ] When to replace the dry batteries When the batteries become weak, i in the display on the remote control flashes. When i stops flashing and lights up, replace all the batteries with new ones. â· Do not mix new batteries with old ones. [. . . ]