User manual SONY D-EG3

[. . . ] About the area code The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see "Accessories (supplied/optional). To prevent fire or shock hazard, do not expose the unit to rain or moisture. CAUTION The use of optical instruments with this product will increase eye hazard. [. . . ] This function is useful when using your CD player in a car or other mobile application. * The ESP (Electronic Shock Protection) function prevents the sound from skipping by using a memory buffer that can store music data. The ESP2 (ESP Squared) system can store more music data than ESP, and enables a higher level of shock protection to reduce sound skipping. If the sound is distorted when using the SOUND function, turn down the volume. The CD play may stop if the CD player receives a strong shock. ⷠNoise may be heard or sound may be skipped if: ­ a dirty or scratched CD is played ­ an audio test CD that contains certain special signals is played ­ the CD player receives a continuous shock · Sound may be intermitted for a while when you press the ESP button during play. (HOLD) You can lock the controls on your CD player to prevent accidental button presses. (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. If you turn up the volume to " *" "AVLS" flashes and you cannot turn up the volume any more. When you want to turn up the volume to more than " *, " set AVLS to "NORM. If the sound is distorted when you simultaneously use the SOUND and AVLS functions, turn down the volume. (Resume play) Your CD player can recall the playback point where you stopped and resume playing from the same place. Turning off the operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. Connect the power source while pressing x· Resume play is canceled if you open the CD player lid (even if the RESUME switch is set to "ON"). To turn on the beep sound Remove the power source and then connect the power source without pressing x· B Connecting your CD player You can listen to CDs through a stereo system and record CDs on a cassette tape. for details , see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. ⷠUse the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording. ⷠAdjust the volume properly so that the sound will not be distorted. [. . . ] ⷠWhen the batteries are not to be used for a long time, remove them. ⷠIf battery leakage occurs, wipe off any deposit in the battery compartment, and install new batteries. In case the deposit adheres to you, wash it off thoroughly. Should any solid objects or liquid fall into the CD player, unplug it and have it checked by qualified personnel before operating it any further. [. . . ]