User manual SONY D-EJ620

[. . . ] · Depending on the AC power adaptor, noise may be heard while using the unit. Refer to the operating instructions of the AC power adaptor. G-PROTECTION function To use the AC power adaptor (not supplied) Connect the AC power adaptor as illustrated. Playing a CD 1 Slide OPEN to open the lid and fit the CD to the pivot, then close the lid. To play from the first track, press for 2 seconds or more while the CD player is stopped. [. . . ] · This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. (Precautions) · Do not put any heavy object on top of the CD player. The CD player and the CD may be damaged. · Do not leave the CD player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain, mechanical shock, unleveled surface, or in a car with its windows closed. · If the CD player causes interference to the radio or television reception, turn off the CD player or move it away from the radio or television. The function provides protection against sound skipping during many active uses. * The default setting is "G-on. " To select "G-off, " press while you keep pressing during stop. To enjoy high quality CD sound, select "G-off". * Sound may skip: if the CD player receives stronger continuous shock than expected / if a dirty or scratched CD is played / when using poor-quality CD-Rs/CD-RWs or if there is a problem with the recording device or application software. On dry batteries Bookmark play If you add bookmarks to your favorite tracks, you can listen to these tracks only from the track with the lowest number. 1 During playback of the track where you want to add a Bookmark, press and hold until " (Bookmark)" flashes on the display. You should exercise extreme caution or discontinue use in potentially hazardous situations. Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. Consideration for others Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you. To clean the plugs If the plugs become dirty, there is no audio or noise is heard. Clean them with a dry soft cloth periodically. Specifications System: Compact disc digital audio system Laser diode properties: Power requirements: · Two LR6 (size AA) batteries: 1. 5 V DC × 2 Design and specifications are subject to change without notice. Emission duration: Continuous Laser output: Less than 44. 6 µW (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. ) Dimensions (w/h/d) (without projecting parts and controls): Approx. 139. 8 × 27. 9 × 139. 8 mm Mass (excluding accessories): Approx. 188 g Operating temperature: 5°C - 35°C (41° F - 95° F) Supplied accessories Headphones (1) The use of optical instruments with this product will increase eye hazard. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area). [. . . ] The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area). Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to CAUTION the applicable collection point for the recycling of electrical and electronic equipment. [. . . ]