User manual SONY D-EJ621

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. The CE mark on the CD player is valid only for products marketed in the European Union. 2 Table of Contents Getting started Locating the controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press SOUND to select "BASS 1" or "BASS 2. " No indication (Normal play) Press DISPLAY. Each time you press the button, the display changes as follows. Display BASS 1 BASS 2 Normal play Track number and elapsed playing time The selected sound mode is displayed. Press DISPLAY Track number and remaining time on the once. current track "BASS 2" enhances the bass sound more than "BASS 1. " Note Press DISPLAY The number of tracks left* and remaining time on the twice. CD* If the sound is distorted when using the SOUND function, turn down the volume. * Not displayed during Single play, Shuffle play or PGM play. 14 Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. Set AVLS (under the lid) to "LIMIT. " Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. Slide HOLD in the direction of the arrow. CD player Remote control Appears when the volume is turned up and beyond a certain level. CHARGE lamp flashes while the HOLD function is activated. Available features To turn off the AVLS function Set AVLS to "NORM. " You can use the HOLD function with both the CD player and remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. To unlock the controls Slide HOLD in the opposite direction of the arrow. Note Even if the HOLD function is working, "HOLD" will not appear in the display of the remote control. 15 Turning off the operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. 1 2 Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. Connect the power source while pressing x (x/CHARGE for the CD player). To turn on the beep sound Remove the power source and then connect the power source without pressing x or x/CHARGE. 16 B Connecting your CD player Connecting a stereo system You can listen to CDs through a stereo system and record CDs on a cassette tape and a MiniDisc. For details, see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. Notes · Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. · Use the AC power adaptor for recording. In case the deposit adheres to you, wash it off thoroughly. 22 B Additional information Precautions On safety · Should any solid objects or liquid fall into the CD player, unplug it and have it checked by qualified personnel before operating it any further. · Do not put any foreign objects in the DC IN 4. 5 V (external power input) jack. On headphones/earphones Road safety Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your headsets at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. Preventing hearing damage Avoid using headphones/earphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. Consideration for others Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you. On the CD player · Keep the lens on the CD player clean and do not touch it. If you do so, the lens may be damaged and the CD player will not operate properly. [. . . ] "Lobatt" or "000" appears in the display. "HiDCin" appears in the display. The CD does not play or "Nodisc" appears in the display when a CD is placed in the CD player. 24 Symptom CHARGE lamp flashes when you press a button, the CD does not play. Cannot adjust the volume with the VOL +/­ buttons on the CD player. During recording with optical digital connection, the track number cannot be recorded correctly. [. . . ]