User manual SONY D-EJ764

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. CAUTION · INVISIBLE LASER RADIATION WHEN OPEN · DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS 2 Table of Contents Getting started Locating the controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press and hold SOUND until "AVLS" appears in the display. Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. Slide HOLD in the direction of the arrow. CD Player Remote control Flashes when the volume is turned up and beyond a certain level. To turn off the AVLS function Hold down SOUND until "AVLS" disappears from the display. The CHARGE lamp flashes when the HOLD function is activated. You can use the HOLD function with both the CD player and remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. To unlock the controls Slide HOLD in the opposite direction of the arrow. Note No display appears in the display on the remote control even when the HOLD function is activated. 10 Turning off the operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. 1 2 Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. Connect the power source while pressing CHARGE/x on the CD player or x on the remote control. Available features To turn on the beep sound Remove the power source and then connect the power source without pressing CHARGE/x or x. 11 B Connecting your CD player Connecting a stereo system You can listen to CDs through a stereo system and record CDs on a cassette tape. For details, see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. Notes · Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. · Use the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording. · Adjust the volume properly on the CD player and the connected device so that the sound will not be distorted or noisy. About the G-PROTECTION function when using the connecting cord · To record high quality CD sound, set the G-PROTECTION switch to "OFF. " to i Adjust the volume. Connecting cord Left (white) Right (red) Stereo system, cassette recorder, radio cassette recorder, etc. 12 B Connecting to a power source You can use the following power sources: · Rechargeable batteries · AC power adaptor (see "Playing a CD") · LR6 (size AA) alkaline batteries For the battery life and charging time of the rechargeable batteries, see "Specifications. " 3 Connect the AC power adaptor to the DC IN 4. 5 V jack of your CD player and an AC outlet, then press CHARGE/x to start charging. CHARGE/x button Using the rechargeable batteries Charge the rechargeable batteries before using them for the first time. · Do not mix new batteries with old ones. · Do not use different types of batteries together. · When the batteries are not to be used for a long time, remove them. · If battery leakage occurs, wipe off any deposit in the battery compartment, and install new batteries. In case the deposit adheres to you, wash it off thoroughly. Connecting to a power source Battery power is getting low. Battery power is low. · Do not stick paper or tape onto the CD. Not these ways 16 Troubleshooting Should any problem persist after you have checked these symptoms, consult your nearest Sony dealer. Symptom The volume does not increase even if you press the VOL + button repeatedly. The playing time is too short when powered with the dry batteries. The playing time is too short when powered with the rechargeable batteries. "Lo batt" or "00" appears in the display. "HI dc In" appears in the display. Cause and/or corrective actions c Press and hold SOUND until "AVLS" disappears from the display. [. . . ] Leave the CD player aside for several hours until the moisture evaporates. c Close the lid of the battery compartment firmly. (page 13) c Make sure the batteries are inserted correctly. (pages 13 - 15) c Connect the AC power adaptor to an AC outlet securely. [. . . ]