User manual SONY D-ES55

[. . . ] This decreases the frequency of sound skipping and the need to utilize the buffer memory. Use this function when listening in a car or while walking. * * Although ESP2 provides excellent protection against skipping, it will not prevent skipping while jogging or running. ESP PLAY MODE If you want to play a CD right now, choose to use your player on house current. Other choices are the following three: rechargeable battery, dry batteries (see "Power Sources" on the reverse side) and car battery. = repeatedly** + once** 1 Connect to a wall outlet AC power adaptor During play, press PLAY MODE repeatedly until "SHUF" appears. [. . . ] Each time you press REPEAT/ENTER, the track number and the playing order appear in the order you specified. Note For the customers not in Poland The mark on the unit is valid only for products marketed in Poland. For the customers not in Europe The CE mark on the unit is valid only for products marketed in the European Union. For the customers not in Russia The mark on the unit and package is valid only for products marketed in Russia. 2 Adjust the volume. To stop play, press p. To cancel INTRO PGM play, press PLAY MODE repeatedly until the play mode indication disappears from the display. · If you program another track after the 22nd track, the first track programed is cleared and the new track is programed instead. To protect your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears. Playing a CD in a car You can use your player in a car by connecting it to the car cassette deck. You cannot use the car mount plate for this player. When you use the player in a car, install it securely in a location which does not interfere your driving. To connect your player to a car cassette deck, you need the following accessories: · Car connecting pack · Car battery cord or, · Car battery cord with car connecting pack DCC-E26CP Refer to the instruction manual of each accessory for details. zPower Sources Using rechargeable battery Charge the rechargeable battery before using it for the first time. Use only BP-DM10 rechargeable battery for this player. Do not use any other rechargeable batteries. Using dry batteries zAdditional Information Precautions Notes · Since the unit is airtight, you may not be able to open the lid when there is a sudden change in air pressure inside the unit. This happens when the unit is transported on a plane or moved from a warm place to a cold place. In this case, open the rubber cap on the DC IN 4. 5 V jack. · To prevent water from leaking in, the buckle is designed to be slightly stiff. Be careful not to catch a fingernail on the buckle when unfastening the lid. Maintenance To clean the lens Clean the lens with a lens cleaning kit KK-DM1. (If the battery has been already charged, "CHG" and flash. ) The CD does not play or "no dlSC" appears in the display though a CD is placed in the player. m The CD is dirty or defective. Leave the player aside for several hours until the moisture evaporates. m Close the lid of the player and the battery compartment firmly. m Make sure the batteries are inserted correctly. m Connect the AC power adaptor to a wall outlet securely. 1 When to replace the dry batteries When the battery becomes weak, indication appears in the display. If the batteries are used up, "Lo ba " appears in the display. Replace all the batteries with new ones. Notes DC IN 4. 5 V · Do not charge the dry batteries. · Do not mix new batteries with old ones. · Do not use different types of batteries together. [. . . ] When the rechargeable battery becomes weak, indication appears in the display. If the "Lo ba " appears in the display, charge the rechargeable batteries, because the battery is used up. To keep the original battery capacity for a long time, recharge the battery when the battery is used up (discharged). Notes · Charging time varies depending on how the rechargeable battery is used. [. . . ]