User manual SONY D-F525

[. . . ] About the area code The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see "Accessories (supplied/optional). To prevent fire or shock hazard, do not expose the unit to rain or moisture. CAUTION The use of optical instruments with this product will increase eye hazard. [. . . ] You can listen to CDs through a stereo system and record CDs on a cassette tape and a MiniDisc. for details , see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. Resume play is canceled if you open the CD player lid (even if the RESUME switch is set to "ON"). Turning off the operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. Connect the power source while pressing x on the CD player. To turn on the beep sound Remove the power source and then connect the power source without pressing x. Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. ⷠUse the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording. ⷠRadio sound is not be output from the LINE OUT (OPTICAL) jack. Using your CD player in a car You can use your CD player in a car by connecting it to the car cassette deck. You cannot use the car mount plate for this CD player. When you use your CD player in a car, install it securely in a location that does not interfere with your driving. Optional car accessory needed To connect your CD player to a car cassette deck, you need the following car accessories in "Accessories (supplied/optional)": · * Noise may be heard if you use an optional connecting cord. It is recommended that you use a Sony car connecting pack to reduce noise. When you record a CD on a cassette tape using a cassette recorder that has the blank search function, turn off the ESP2 function. If the ESP2 function is set to on, the blank search function does not work. ⷠYou cannot adjust the volume of the headphones/earphones on the CD player or the remote control. When using the optical digital connecting cord To record a CD on a MiniDisc, DAT, etc. , make sure that the CD player is in pause before operating the recording procedures. [. . . ] "Hold" appears in the display when you press a button, and the CD does not play. You cannot operate the CD player using the tuner-remote control. During recording with optical digital connection, the track number cannot be recorded correctly. (page 18) c Record the track number again using the MiniDisc recorder, DAT recorder, etc. [. . . ]