User manual SONY D-FJ61

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. CAUTION The use of optical instruments with this product will increase eye hazard. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. [. . . ] The CD player starts scanning the stations from the lower frequencies and stops for about 3 seconds when a station is received. If you want to preset the received station, press MEMORY while the preset number is flashing. The received station is preset on the preset number 1 and the CD player starts scanning for the next receivable station. If you do not press MEMORY within the 3 seconds, the CD player will start scanning for the next receivable station without storing the station. Repeat step 3 until all receivable stations are preset. If the stations have already been stored, the newly preset stations will replace the old ones. Using the radio 4 To stop scanning · Press FM or AM. The radio is turned off at the same time. To preset stations manually If the stations cannot be preset automatically, preset the stations manually. The preset number 1 will flash in the display. 3 While the preset number 1 is flashing, tune in a station you want using TUNING +/­, and select a preset number using PRESET +/­. 4 To store, press MEMORY while the preset number is flashing. If there was a station stored on this preset number, the newly preset station will replace the old one. Note If you cannot complete step 3 or 4 while the preset number is flashing in the display, repeat from step 2. To play preset stations 1 Press FM or AM. · Do not throw the batteries into fire. · Do not carry the batteries with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery are accidentally contacted by a metallic object. · Do not mix rechargeable batteries with dry batteries. · Do not mix new batteries with old ones. · Do not use different types of batteries together. · When the batteries are not to be used for a long time, remove them. · If battery leakage occurs, wipe off any deposit in the battery compartment, and install new batteries. In case the deposit adheres to you, wash it off thoroughly. Battery power is getting low. Battery power is low. Lo batt* r Batteries are depleted. * Beep sounds. When the batteries are depleted, replace both batteries with new ones. 22 B Additional information Precautions On safety · Should any solid objects or liquid fall into the CD player, unplug it and have it checked by qualified personnel before operating it any further. · Do not put any foreign objects in the DC IN 4. 5 V (external power input) jack. · Do not expose the CD to direct sunlight or heat sources such as hot air ducts. [. . . ] (page 6) c The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device. c There is a problem with the quality of the CD-R/CD-RW, recording device, or application software. The CD does not play or "no dISC" appears in the display when a CD is placed in the CD player. 24 CD player Symptom "Hold" appears in the display when you press a button, and the CD does not play. Cannot adjust the volume with the VOLUME control on the CD player. [. . . ]