User manual SONY D-FJ737

[. . . ] About the area code The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see "Accessories (supplied/optional). To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] for details , see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. ⷠUse the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording. ⷠAdjust the volume properly on the connected device so that the sound will not be distorted. When using the connecting cord If the sound is distorted, connect the device to the i jack. When using the optical digital connecting cord To record a CD on a MiniDisc, DAT, etc. , make sure that the CD player is in pause before operating the recording procedures. About the G-PROTECTION and SOUND functions when using the connecting cord or optical digital connecting cord · To record high quality CD sound, set the G-PROTECTION switch to "OFF. " · The SOUND function works only on the output sound from the i jack and not work on the output sound from the LINE OUT (OPTICAL) jack. About Joint Text (CD text copying function) The Joint Text function allows you to copy the disc and track names that are on a CD containing CD text information. By connecting a Sony MD Walkman (MZ-R900/ R909), which supports Joint Text, to this CD player, you can copy the CD text onto an MD during recording. You must use an optical digital connecting cable (POC-15B or other model, not supplied) and the RK-TXT1 CD text connecting cable (not supplied) to make the connections. Connecting your CD player You can use the following power sources: · 5 V jack of your CD player and an AC outlet, then press x/CHG to start charging. Charge the rechargeable batteries before using them for the first time. You can use only the following rechargeable batteries for your CD player. Insert two rechargeable batteries by matching the 3 to the diagram in the battery compartment and close the lid. The "CHG" indicator turns on in the display, light and the indicator sections of up in succession. When the batteries are completely charged, the "CHG" and indicators turn off. If you press x/CHG after the charge has already been completed, the indicator flashes and "Full" appears in the display. When to replace the rechargeable batteries If the battery life becomes shorter by about half, replace the batteries with new rechargeable batteries. [. . . ] C Record the track number again using the MiniDisc recorder, DAT recorder, etc. To start playing from the first track, press u until the play of the first track starts, or open the lid of the CD player. Or remove all power sources, then insert the batteries or connect the AC power adaptor again. Inserted a new battery into the tuner-remote control but cannot operate your CD player. [. . . ]