User manual SONY D-FJ75TR

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. CAUTION The use of optical instruments with this product will increase eye hazard. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. [. . . ] If the stations have already been stored, the newly preset stations will replace the old ones. Using the radio 4 To stop scanning · Press FM or AM. The radio is turned off at the same time. To preset stations manually If the stations cannot be preset automatically, preset the stations manually. The preset number 1 will flash in the display. 3 While the preset number 1 is flashing, tune in a station you want using TUNING +/­, and select a preset number using PRESET +/­. 4 To store, press MEMORY while the preset number is flashing. If there was a station stored on this preset number, the newly preset station will replace the old one. Note If you cannot complete step 3 or 4 while the preset number is flashing in the display, repeat from step 2. To play preset stations 1 Press FM or AM. 2 Press PRESET + or ­ to tune in a stored station. 15 Changing the tuning interval When using the CD player abroad, change the AM tuning interval, if necessary. Set the STEP switch (inside the lid) to "9 kHz" or "10 kHz" using a pointed material. 9 kHz area: Asia and Europe 10 kHz area: the U. S. A. , Canada and South America Notes · The interval will not change until you once turn off the radio and then turn it on again. · After changing the tuning interval, you need to preset radio stations again. 16 B Available features G-PROTECTION function The G-PROTECTION function has been developed to provide excellent protection against sound skipping while jogging. Insert two LR6 (size AA) batteries by matching the 3 to the diagram in the battery compartment. Insert the # end first (for both batteries). To remove the batteries Remove the batteries in the same way as rechargeable batteries. When to replace the batteries You can check the remaining power of the batteries in the display. Battery power is full. r r r r Battery power is getting low. · When disconnecting the AC power adaptor from the AC outlet, grasp the adaptor itself. · Do not touch the AC power adaptor with wet hands. · Connect the AC power adaptor to an easily accessible AC outlet. Should you notice an abnormality in the AC power adaptor, disconnect it from the AC outlet immediately. · For customers who have purchased the JE. W model: Before using the AC power adaptor, set it to the voltage of the local AC power supply. Connecting to a power source Battery power is low. Lo batt* r Batteries are depleted. * Beep sounds. When the batteries are depleted, replace both batteries with new ones. to an AC outlet Use a screw driver to turn the rotary switch. (Continued) 23 Notice on the power source On rechargeable batteries and dry batteries · Do not charge the dry batteries. · Do not throw the batteries into fire. · Do not carry the batteries with coins or other metallic objects. [. . . ] (page 6) c The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device. c There is a problem with the quality of the CD-R/CD-RW, recording device, or application software. The CD does not play or "no dISC" appears in the display when a CD is placed in the CD player. 26 CD player Symptom "Hold" appears in the display when you press a button, and the CD does not play. Cannot adjust the volume with the VOLUME control on the CD player. [. . . ]