User manual SONY D-NE1

[. . . ] (for ATRAC3plus/ ATRAC3/MP3 files only) qd w; HOLD switch Locks the control on your CD player to prevent accidental button presses. Qh Display Displays the track number, remaining time/tracks (when playing an audio CD), the file number, file name, artist name, CODEC remaining time of the current file, group name (when playing an ATRAC CD/MP CD), elapsed playing time, battery status, and play mode and functions you selected. [. . . ] Symptom The CD does not play, or "No disc" appears in the display when a CD is placed in the CD player. Cause and/or corrective actions c c c c c c c c c c c CHARGE lamp flashes on the CD player when you press a button, and the CD does not play. Leave the CD player aside for several hours until the moisture evaporates. close the lid of the battery compartment firmly. Make sure the batteries are inserted correctly. connect the AC power adaptor to an AC outlet securely. Press the jog lever after one second or more has passed since the AC power adaptor was connected. There is a problem with the quality of the CD-R/RW, recording device, or application software. Files in two or more formats have been recorded on the same CD-R/ RW. Cannot adjust the volume c The CD player is connected to an audio device. C The CD player is not placed securely on the charging stand. Place the player on the stand, aligning the V mark on the player and the v mark on the stand. [. . . ] " " is flashing quickly in the display, and you cannot locate the beginning of the track or the specific point in the track. You cannot operate the CD player properly using the remote control. [. . . ]