User manual SONY D-NE301CK

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] If about 40 seconds at most have passed without any operation being performed, the screen returns to the previous one. (Parametric equalizer) You can enjoy your favorite sounds by adjusting sound quality in the following two ways: · Selecting a preset sound pattern t "Selecting the sound quality you want" · Adjusting sound quality by yourself t "Customizing sound quality" Perform steps 1 - 3 of "Selecting the sound quality you want" and select "CUSTOM. Or > for 2 seconds or more to select the frequency range. Selecting the sound quality you want * You can also use DISPLAY/MENU to enter the selection as well as u/ENTER. You want, then press u/ENTER to enter the selection. Indication SOFT ACTIVE HEAVY Sound quality For vocals, stressing middle range audio Lively sounds, emphasizing high and low range audio Powerful sounds, further emphasizing high and low ranges compared with ACTIVE sound Customized sound Press V or v to select the sound volume, then press . Or > repeatedly to select the shape of the wave from the 3 shapes stored in memory for each frequency range. Repeat steps 2 and 3 to make adjustment for the remaining 2 frequency ranges. You can customize sound quality by adjusting the sound volume in the 3 frequency ranges "LOW" (low range audio), "MID" (middle range audio) and "HIGH" (high range audio). For each frequency range, you can select the wave pattern from among 3 patterns, and can also adjust the sound volume in 7 levels for the pattern you select. Sound may skip: ­ if the CD player receives stronger continuous shock than expected, ­ if a dirty or scratched CD is played, or ­ when using poor-quality CD-Rs/RWs or if there is a problem with the original recording device or application software. When you select CUSTOM sound, sound may be distorted depending on your sound settings when you turn up the volume. ⷠYou may feel a difference in sound volume between the CUSTOM sound setting and other sound settings. (AVLS) The AVLS (Automatic Volume Limiter System) function keeps the maximum volume down to protect your hearing. The G-PROTECTION function has been developed to provide excellent protection against sound skipping during many active uses. Press V or v to select "AVLS, " then press u/ENTER to enter the selection. Press V or v to select "ON, " then press u/ENTER to enter the selection. While play is stopped, press and hold DISPLAY/MENU until the MENU screen appears. press V or v to select "OPTION , " then press u/ENTER. Press V or v to select "GPROTECTION, " then press u/ ENTER to enter the selection. Press V or v to select "G-PRO 1" or "G-PRO 2, " then press u/ ENTER to enter the selection. if you select "G-PRO 2 , " the G-PROTECTION function will be enhanced compared to "G-PRO 1. [. . . ] Troubleshooting Symptom "HOLD" flashes in the display when you press a button, and the CD does not play. Playback starts from the point you stopped. During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally. "NO FILE" appears on the display after you press u/ ENTER or when the lid of the CD player is closed. [. . . ]