User manual SONY D-NE710

[. . . ] 3-253-120-11 (1) Portable CD Player Operating Instructions PT "WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products. is a trademark of Sony Corporation. D-NE710 © 2003 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And don't place lighted candles on the apparatus. [. . . ] While the CD player is playing Turn the jog dial to select the file you want, then press ENTER. The CD player starts play. To select another group while the CD player is in the file search mode 1 Turn the jog dial until " :" appears, then press ENTER. " : group name" appears and the CD player enters the group search mode. 2 Turn the jog dial to select the group you want, then press ENTER. 3 Turn the jog dial to select the file you want, then press ENTER. To cancel the search While the CD player is in the group search mode: Turn the jog dial until "CANCEL" appears, then press ENTER. While the CD player is in the file search mode: 1 Turn the jog dial until " :" appears, then press ENTER. 2 Turn the jog dial until "CANCEL" appears, then press ENTER. Note When using an ATRAC or MP3 CD, up to 400 file names or up to 100 group names can be displayed. If the number of files or groups surpasses these figures, a file number such as "401" or a group number such as "101" will be displayed instead of names. 20 Playing tracks in your favorite order (PGM play) You can program the CD player to play up to 64 tracks ("files" when playing an ATRAC/MP3 CD) in your favorite order. 1 While the CD player is stopped, press PLAY MODE repeatedly until "PGM" appears. Audio CD ATRAC/MP3 CD 2 Turn the jog dial (or press . or >) to select your favorite track or file, then press ENTER. The playing order increases by one. Audio CD Playing order Track number ATRAC/MP3 CD* Group name Playback options Playing order File name m Playing order m Group name Playing order *You can also select another group using + or ­. 3 4 Repeat step 2 to select the tracks or files in your favorite order. Press u, or press and hold ENTER until play starts. (Continued) 21 To check the program During programming: Press ENTER repeatedly before step 4. During stop: Press PLAY MODE repeatedly until "PGM" flashes, then press ENTER. Each time you press ENTER, the track number appears. Notes · When you finish entering the 64th track in step 2, the first track selected appears in the display. · If you select more than 64 tracks, the first tracks selected are erased. When playing ATRAC3plus/ATRAC3/MP3 files In PGM mode, you can program up to 64 files the same as you would for audio CD tracks. 22 B Available features The G-PROTECTION function The G-PROTECTION function has been developed to provide excellent protection against sound skipping during many active uses. When you set the G-PROTECTION switch on your CD player to "2, " the GPROTECTION function will be enhanced compared to "1. " To walk with the CD player and enjoy high quality CD sound using the G-PROTECTION function, set the G-PROTECTION switch to "1. " While taking harder exercise, it is recommended that you set it to "2. " Note Sound may skip: ­ if the CD player receives stronger continuous shock than expected, ­ if a dirty or scratched CD is played or ­ when using poor-quality CD-Rs/CD-RWs or if there is a problem with the original recording device or application software. Checking the time remaining on the CD and the number of tracks left (audio CD) Each time you press DISPLAY, the display changes as follows. For an audio CD containing CD text information, information in parentheses also appears. t Track number and elapsed playing time (name of the current track) r Track number and remaining time of the current track (name of the current track/artist name) r The number of tracks left* and the time remaining on the CD* (album name/artist name) Available features * Not displayed during Single play, Shuffle play or Bookmark track play. 23 Checking information on a CD with ATRAC3plus/ATRAC3/ MP3 files You can check information on a CD with ATRAC3plus/ATRAC3/MP3 files using DISPLAY. You can also check ID3 tag information if the file has that information stored. Each time you press DISPLAY, the display changes as follows: t File name, group name and elapsed playing time r Artist name, CODEC information*, remaining time of the current file r The total number of groups and the total number of files *Variable bit rate and sampling frequencies Emphasizing the bass sound (SOUND) You can emphasize the bass-boosted sound. Press SOUND to select "BASS "BASS . " No indication (Normal play) " or "BASS "BASS " " The selected sound mode is displayed. Notes · If the group does not have a group name, "ROOT" appears in the display. · If the file does not have ID3 tag information, "- - - -" appears in the display. "BASS " enhances the bass sound more than "BASS . " Note If the sound is distorted when using the SOUND function, turn down the volume. 24 Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. [. . . ] Files in two or more formats have been recorded on the CD-R/RW. (page 25) c The CD player is connected to an audio device. Adjust the volume using the volume control on the connected device. (page 26) c During stop, press x/CHARGE. [. . . ]