User manual SONY D-NE800

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] Repeat steps 2 and 3 to make adjustment for the remaining 2 frequency ranges. " To enjoy high quality CD sound, select "GPRO 1. Sound may skip: ­ if the CD player receives stronger continuous shock than expected, ­ if a dirty or scratched CD is played, or ­ when using poor-quality CD-Rs/RWs or if there is a problem with the original recording device or application software. You can set the CD player to stop the play automatically within a range of 1 to 99 minutes. While the timer function is working, the following indications appear: · (AVLS) The AVLS (Automatic Volume Limiter System) function keeps the maximum volume down to protect your hearing. Or > to select "TIMER, " then press the jog lever to enter the selection. (CD player: Press F or f to select "TIMER, " then press DISPLAY/MENU to enter the selection. If you have changed the setting, the length of time already set appears. (CD player : Press DISPLAY/MENU until the MENU screen appears. Or > to select "AVLS, " then press the jog lever to enter the selection. (CD player: Press F or f to select "AVLS, " then press DISPLAY/ MENU to enter the selection. Or > to select "ON, " then press the jog lever to enter the selection. (CD player: Press F or f to select "ON, " then press DISPLAY/MENU to enter the selection. (HOLD) You can lock the controls on your CD player to prevent accidental button presses. The OPR lamp flashes if you press any button when the HOLD function is activated. slide HOLD in the direction of the arrow. You can use the HOLD function with both the CD player and the remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. Even if the HOLD function is working, "HOLD" will not appear in the display of the remote control. Turn VOL +/­ to select the length of time you want to set, then press the jog lever to enter the selection. (CD player: Press F or f to select the length of time you want to set, then press DISPLAY/MENU to enter the selection. ) To check the length of time before the CD player stops playback During play, perform steps 1 - 3. [. . . ] Symptom During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally. "NO FILE" appears in the display after the jog lever is pressed (CD player: after you push the 5-way control key toward u) or the lid of the CD player is closed. When closing the lid of the CD player, the CD starts to rotate. Cause and/or corrective action c The CD player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. [. . . ]