User manual SONY D-NF611

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] If the number of files or groups surpasses these figures, a file number such as "401" or a group number such as "101" will be displayed instead of names. Once you've preset the stations, you can easily tune in the station by pressing PRESET + or ­ button. Each time you press the button, the display changes as follows: t FM t AM Hold down TUNE + or ­ in step 3 until the frequency digits begin to change in the display. The CD player automatically scans the radio frequencies and stops when it finds a clear station. The noise will be reduced but the radio will play in monaural. Under the normal conditions, press and hold P MODE/ until "Local" disappears from the display. * For the area code of the model you purchased, check the upper left side of the bar code on the package. If you connect the external power source plug to the DC IN 4. 5 V jack of your CD player, the CD player will turn off. The CD player starts scanning the stations from the lower frequencies and stops for about 3 seconds when a station is received. If you want to preset the received station, press MEMORY while the preset number is flashing. The interval will not change until you once turn off the radio and then turn it on again. ⷠAfter changing the tuning interval, you need to preset radio stations again. The G-PROTECTION function has been developed to provide excellent protection against sound skipping while jogging. When you set the G-PROTECTION switch on your CD player to "2, " the GPROTECTION function will be enhanced compared to "1. " To walk with the CD player and enjoy high quality CD sound using the G-PROTECTION function, set the G-PROTECTION switch to "1. " While taking harder exercise, it is recommended that you set it to "2. Sound may skip: ­ if the CD player receives stronger continuous shock than expected, ­ if a dirty or scratched CD is played or ­ when using poor-quality CD-Rs/RWs or if there is a problem with the original recording device or application software. Checking the time remaining on the CD and the number of tracks left (audio CD) Each time you press DISPLAY, the display changes as follows. Track number and elapsed playing time (name of the current track) r Track number and remaining time of the current track (name of the current track/artist name) r The number of tracks left* and the time remaining on the CD* (album name/artist name) * Not displayed during Single play, Shuffle play or Bookmark track play. You can check information on a CD with ATRAC3plus/ATRAC3/MP3 files using DISPLAY. you can also check ID3 tag information if the file has that information stored. [. . . ] When using with a connected c Adjust the volume of the CD player and the connected device. (page stereo system , the sound is 29) distorted or noisy. During playback of an ATRAC c The CD player is designed to stop the rotation of an ATRAC CD or CD or MP3 CD, the CD does MP3 CD during playback to reduce the power consumption. The not rotate but you can hear player is not malfunctioning. [. . . ]