User manual SONY D-NS921F

[. . . ] To prevent fire or shock hazard, do not expose the AC power adaptor to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] Push the 4-way control key toward x· The G-PROTECTION function has been developed to provide excellent protection against sound skipping while jogging. When you set the G-PROTECTION switch on your CD player to "2, " the GPROTECTION function will be enhanced compared to "1. " To walk with the CD player and enjoy high quality CD sound using the G-PROTECTION function, set the G-PROTECTION switch to "1. " While taking harder exercise, it is recommended that you set it to "2. Sound may skip: ­ if the CD player receives stronger continuous shock than expected, ­ if a dirty or scratched CD is played or ­ when using poor-quality CD-Rs/CD-RWs or if there is a problem with the original recording device or application software. Checking the time remaining on the CD and the number of tracks left (audio CD) Each time you press DISPLAY, the display changes as follows. Track number and elapsed playing time (name of the current track) r Track number and remaining time of the current track (name of the current track/artist name) r The number of tracks left* and the time remaining on the CD* (album name/artist name) * Not displayed during Single play, Shuffle play or Bookmark track play. You can check information on a CD with ATRAC3plus/ATRAC3/MP3 files using DISPLAY. you can also check ID3 tag information if the file has that information stored. Each time you press DISPLAY, the display changes as follows: File name, group name and elapsed playing time r Artist name, CODEC information*, remaining time of the current file r The total number of groups and the total number of files If the group does not have a group name, "ROOT" appears in the display. If the sound is distorted when using the SOUND function, turn down the volume. (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. Turning off the operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. Connect the power source while pushing the 4-way control key toward x· CHG (RADIO OFF) for about one second or more. Flashes when the volume is turned up beyond a certain level. To turn off the AVLS function Press and hold SOUND until "AVLS OFF" appears in the display. note If you use the SOUND function and the AVLS function at the same time, sound may be distorted. To turn on the beep sound Remove the power source and then connect the power source without pushing the 4-way control key toward x · (HOLD) You can lock the controls on your CD player to prevent accidental button presses. slide HOLD in the direction of the arrow. "HOLD" flashes if you press any button when the HOLD function is activated. B Connecting your CD player You can listen to CDs through a stereo system and record CDs on a cassette tape. [. . . ] (pages 12, 13, 33) Rustling noise is heard from c Close the lid of the battery compartment firmly. When using with a connected c Adjust the volume of the CD player and the connected device. Symptom During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally. "NO FILE" appears in the display after you push the 4way control key toward u or you close the lid of the CD player. [. . . ]