User manual SONY D-SJ17CK

[. . . ] 17 Using dry batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Notes on the power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This function provides a higher level of shock protection than the traditional one. While jogging, use the supplied hand strap (see "Using the hand strap" in Locating the controls). Set G-PROTECTION (under the lid) to "ON. " Emphasizing the bass sound (SOUND) You can emphasize the bass-boosted sound. Press SOUND to select "BASS "BASS . " No indication (Normal play) " or BASS BASS To turn off the G-PROTECTION function Set G-PROTECTION to "OFF. " Note Sound may skip if: ­ the CD player receives stronger continuous shock than expected or ­ a dirty or scratched CD is played. The selected sound mode is displayed. "BASS " enhances the bass sound more than "BASS . " Note If the sound is distorted when using the SOUND function, turn down the volume. 12 Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. Set AVLS (under the lid) to "LIMIT. " Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. Slide HOLD in the direction of the arrow. Available features Displayed when "LIMIT" is selected and AVLS function is working. Displayed when the HOLD function is working. To turn off the AVLS function Set AVLS to "NORM. " To unlock the controls Slide HOLD in the opposite direction of the arrow. 13 Turning off the operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. 1 2 Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. Connect the power source while pressing x/CHG. To turn on the beep sound Remove the power source and then connect the power source without pressing x/CHG. 14 B Connecting your CD player Connecting a stereo system You can listen to CDs through a stereo system and record CDs on a cassette tape. For details, see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. Notes · Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. · Use the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording. · Do not touch the AC power adaptor with wet hands. On rechargeable batteries and dry batteries · Do not charge the dry batteries. · Do not throw the batteries into fire. · Do not carry the batteries with coins or other metallic objects. · Do not leave the CD player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain, mechanical shock, unleveled surface, or in a car with its windows closed. · If the CD player causes interference to the radio or television reception, turn off the CD player or move it away from the radio or television. On the water resistance · Before unfastening the buckle to open the lid, be sure to wipe off water, dust or sand on the exterior of the unit. Open and close the lid where water or sand cannot fall in the unit, and make sure that your hands are dry. If water or sand falls in the unit, trouble may occur. · When closing the lid, check that there is no dust or sand on the rubber packing around the lid. Then close the lid firmly with the buckle. · The supplied headphones are not meant to be immersed in water or come in continuous contact with water. If they are accidentally dropped into water or get wet, dry them with a soft cloth. [. . . ] The playing time is too short when powered with the rechargeable batteries. When you press u, "Lo batt" or "00" appears in the display. "HI dc In" appears in the display. Cause and/or corrective actions c Set the AVLS switch to "NORM. " (page 13) c Connect the plugs firmly. [. . . ]