User manual SONY D-V500

[. . . ] WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Before operating your player, please read this manual and retain it for future reference. This player can play the following discs: · There are 2 types of discs in size -- 12 cm and 8 cm. Their longest play time is 74 and 20 minutes respectively. [. . . ] To repeat the current track 1 While playing a track you want, press REPEAT/ENTER. While playing a disc, press PLAY MODE repeatedly until "INTRO PGM" flashes. Playing in random order (Shuffle Play) You can have the player "shuffle" tracks and play them at random. "INTRO PGM" flashes faster, and all tracks are played for 15 seconds, one after another. Press REPEAT/ENTER while the track you want to play back later is being played. If you want to skip the track, press NEXT +. press PLAY MODE repeatedly during play until "SHUFFLE" appears on the display. Shuffle play starts from the next track and plays back every track once. When the last track in the disc has been played, "INTRO PGM" stops flashing and then the player starts playing only the tracks you have selected. To stop intro program play, press PLAY MODE repeatedly until "INTRO PGM" disappears. If you select a track directly by pressing the number button (see page 12), intro program play will be canceled. ⷠThis function is not available during PBC playback (to set PBC OFF, see page 9). To stop shuffle play, press PLAY MODE repeatedly until "SHUFFLE" disappears. During shuffle play, you cannot go back to the previous tracks by pressing PREV =. ⷠIf you select a track directly by pressing the number button (see page 12), shuffle play will be canceled. ⷠThis function is not available during PBC playback (to set PBC OFF, see page 9). You can arrange the order of the tracks on the disc and create your own program. To select a track number over 11, press +10 repeatedly, then the corresponding number button to enter the one's digit. Examples: For 12: +10, then 2 For 24: +10, +10, then 4 For 30: +10, +10, then 10 Repeat Step 2 to program your favorite tracks. "RMS" stops flashing and program play starts in the order of the tracks you have selected. To stop program play, press PLAY MODE repeatedly until "RMS" disappears. Each time you press the button, the display shows the track number in the programmed order. [. . . ] B Replace all the batteries in the remote with new ones if they are weak. 6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. 7 V rms at 47 kilohms Recommended load impedance over 10 kilohms Video output (minijack) Output level 1Vp-p at 75 ohms Recommended load impedance over 75 ohms AC power adaptor (1) AV monitor cord (1) Remote control unit (remote) (1) Design and specifications are subject to change without notice. Your dealer may not handle some of the above listed accessories. [. . . ]