User manual SONY D822K

[. . . ] 11 To Turn On Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 To Register Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 To Use the Stand by Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 To Use the Hibernate Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Right-click on the Local Area Connection with the device name, "WAN Network Driver, " select Disable. Open your AOL connection and verify that the application functions properly with the WAN Network Driver disabled. If you need to restore this Network setting, repeat these steps (1 - 3) and select Enable. Topic: How do I change the parallel port type to ECP, EPP, or bidirectional?You can change the parallel port type using the System Setup utility (CMOS Setup Utility). To access System Setup: 1 2 3 4 5 Click Start in the Windows® taskbar, and select Turn Off Computer. When the Sony screen displays, press the F2 key on your keyboard. Select the Advanced tab from the Setup Utility screen. Select "I/O Device Configuration" and press Enter. Use the arrow keys to highlight Parallel Port Mode and press Enter. You can toggle between the Normal (bi-directional), EPP, ECP, and ECP+EPP options using the directional arrow keys. 6 7 Select the desired setting displays, and press Enter. Press the F10 key to Save and Exit. 31 VAIO Slimtop Computer QuickStart Topic: The cursor on my Sony Pen Tablet display does not move or moves in an unpredictable manner when I use the VAIO® pen. You may need to configure your VAIO pen's switch function. If a region code warning appears when you are using the DVD player application, it may be that the region code of the DVD you are trying to play is incompatible with the region code setting of your optical drive. A region code is listed on the disc packaging. Region code indicators such as "1" or "ALL" are labeled on some DVDs to indicate the type of player that can play the disc. Unless a "1" or "ALL" appears on the DVD or on its packaging, you cannot play the disc on this system. If you hear audio but cannot see video, your computer's video resolution may be set too high. To improve video resolution, verify that your screen area is set to 1024 x 768, using 32-bit color (preset factory default). To check your video resolution, see the Troubleshooting topic, "How do I change the video resolution of my display?" If your computer's video memory (RAM) is 11 MB shared system memory, you may improve video resolution by changing your screen area to 800 x 600, using 16-bit color. See your Specifications sheet for details about your computer's video RAM. If you see video but cannot hear audio, check all of the following: Verify that your DVD player's mute feature is turned off. Check the master volume setting in the Audio Mixer. Check the volume settings on your computer speakers. Check the connections between your speakers and the computer. [. . . ] Do not use adhesive labels to identify the disc. The label may come off while the disc is in use in the optical drive and damage the drive. Cleaning CD or DVD media Fingerprints and dust on the surface of a disc may cause read errors. Proper care of the disc is essential to maintain its reliability. Do not use solvents such as benzine, thinner, commercially available cleaners or antistatic spray, as they may cause damage to the disc. [. . . ]