User manual SONY D840K

[. . . ] BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement. This product contains software owned by Sony and licensed by third parties. [. . . ] You can physically connect both a VGA and an LCD monitor at the same time. However, you cannot use both monitors at the same time. If you operate only one monitor to the system, the system automatically detects which monitor is connected. If you connect both monitors, you must choose one monitor from the Display settings. 24 16 DVI-D 17 9 8 1 Identifying Components Mic and Headphones Jacks 13 The microphone and headphones jacks are physically identical, but have different connections. They are standard 3. 5 mm stereo mini-jacks, located at the front of the computer. Headphones Mic Connector Headphones Mic Description 1. 0 Vrms (typical). Electret condenser microphone input. Telephone and Line Jacks The telephone and line jacks are physically identical and have identical connections. They are standard RJ-11 female phone jacks. However, the line jack is for connecting to a telephone line that comes from the wall, and the telephone jack is for connecting the computer to a telephone. Your computer has only one RJ-11 female phone jack if you have a HomePNA modem installed. The modem installed on your computer may differ depending on the configuration you purchased. Line Phone Accidentally plugging a phone line from the wall into the modem's telephone jack, and a telephone into the line jack, does not damage the modem card or telephone equipment. However, the modem will not work correctly. 14 VAIO MX Computer System Reference Manual i. LINK (IEEE 1394) Ports The 6-pin i. LINK port on the back of the system can supply power from the computer to a device if the device also has a 6-pin i. LINK port. To change a power scheme, change the settings for Turn off monitor, and Turn off hard disks, System standby, and System hibernates. The Turn off monitor option allows you to specify the period of inactivity (in minutes) that you want to elapse before your monitor turns off when your computer is running on AC power. The display reactivates when you move the mouse or press a key. The Turn off hard disks option allows you to specify the period of inactivity (in minutes) that you want to elapse before your hard disks turn off when your computer is running on AC power. The System standby option allows you to specify the period of inactivity (in minutes) that you want to elapse before your computer goes on Stand by when your computer is running on AC power. Power is reactivated when you click the left mouse button or press spacebar on the keyboard. The System hibernates option allows you to specify the period of inactivity (in minutes) before your computer goes in the hibernate state. Power is reactivated when you push the power button. 3 To save a new power scheme, first modify the settings, click Save As, type a descriptive name, and then click OK. Configuring Your System 21 4 Click the Advanced tab. 5 Select the desired settings. 22 VAIO MX Computer System Reference Manual 6 Click the Hibernate tab. 7 Select the settings most appropriate for your system. Configuring Your System 23 8 Click the UPS tab. The UPS tab enables you to select and configure an Uninterruptible Power Supply (UPS) device for your system. A UPS device is an optional accessory not currently supplied with your system. 9 Select and configure the settings most appropriate for your system and click OK. For more information about configuring a UPS device, refer to your Microsoft® Windows® XP operating system Help. 24 VAIO MX Computer System Reference Manual Chapter 3 Removing, Installing, and Replacing Components This chapter describes removing, installing, and replacing major components for upgrading, reconfiguring, and troubleshooting the components. ! Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord. Your system's configuration may vary from the illustrations in this section, depending on the hardware options purchased. 25 26 VAIO MX Computer System Reference Manual Removing the Side Panel 1 2 3 4 5 Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. [. . . ] Access to the CMOS Setup Utility depends on which passwords were previously set, as indicated next. If you set these passwords. . . User password only Supervisor password only . . . the following passwords are required: User password is required at bootup. Supervisor password is required by most setup options. Supervisor password is required by most setup options. Both passwords Miscellaneous Technical Information 69 Beep Code Error Messages During a normal bootup, a single short beep signifies that the system is OK. [. . . ]