User manual SONY DAR-RD100

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. The mains lead must only be changed at a qualified service shop. Check that the unit's operating voltage is identical with your local power supply. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. [. . . ] You can play back DATA CDs (CD-ROMs/CDRs/CD-RWs) recorded in JPEG format. However, the discs must be recorded according to ISO9660 Level 1, Level 2, or Joliet format for the recorder to recognize the files. You can also play discs recorded in Multi Session. ) to the front of the files, the files will be played in that order. Since a disc with many trees takes longer to start playback, it is recommended that you create folders with no more than two trees. The recorder can only play files with the extension ". The recorder can recognize up to a total number of 999 folders and files in a disc. The recorder may not recognize some discs depending on the recording device used for recording or the disc condition. Depending on the disc or the size of image files, playback may take some time to start. The image size that the recorder can display is limited to 8192 × 7680 pixels. To free up disc space (DVD+RW/DVD-RW (VR mode)/DVD-RW (Video mode) only) You can erase and overwrite titles other than the last one; however, the display will not show the resulting capacity increase. Before you edit, check these types and select an available option. You may lose edited contents if you remove the disc while editing. Finish editing and recording before finalizing. No more editing or recording can be made on a finalized disc. (Video mode) DVD+R/ DVD-R You cannot increase the disc capacity, as they are nonrewritable. You cannot undo any edits you make, and the original contents will be consequently lost. Z Hint When using a DVD-RW (VR mode), you can keep the original contents by editing a Playlist (see "Edits for Playlist titles" below). The recorder displays only the available capacity after the last title on the disc. For DVD-RWs (VR mode), you can edit a Playlist while retaining original titles (actual recordings on the disc). A Playlist is a group of Playlist titles created from the original title for editing purposes. When you create a Playlist, only the control information necessary for playback, such as the playback order, is stored on the disc. [. . . ] Dolby Pro Logic II creates five full-bandwidth output channels from two channel sources. This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. DVDs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. A digital serial interface for handling digital video, digital audio and other data in two directions between equipment having the i. [. . . ]