User manual SONY DAV-D150B

[. . . ] AC power cord must be changed only at the qualified service shop. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. Check that the unit's operating voltage is identical with your local power supply. â· To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] logic search: During fast forward or rewind press and hold SLOW (m/t or M/T) button. The picture will be played back at 7 times normal playback speed. Please note you may set OPR only when playing back a tape. The DVD/VCR Receiver allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR): Starts recording immediately for a set period of time or until the video cassette runs out. vIDEO Plus+ System Recording greatly simplifies entering the date , channel , start and end times of a Timer Recording. Timer Recording: You may record at a later time (up to 1 month from the present). Up to 7 of these automatic recordings may be set. The DVD/VCR Receiver incorporates Long Play (LP) which enables you to record up to twice the amount of time on a video cassette. For example an E-180 will record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a slight loss in picture and sound quality when using LP. Each successive press will increase the record time by 30 minutes until you reach a maximum of 9 hours. If you want to record from either of the SCART sockets or AV3 on the front, repeatedly press INPUT SELECT for the correct display (AV1, AV2 or AV3). If you are recording from stations that do not broadcast PDC switch PDC off!3 ONCE: ToorTo record at the same time every week. Press G to select the recording speed and press D or E if you wish to record in SP, IP or LP. SP will produce improved picture and sound quality, however LP will provide twice as much recording time as SP. DAILY: To record every day (except Saturday and Sunday) at the same time. If PLEASE CHECK is displayed, you have entered incorrect information and will need to re-enter the data. The TV PlusCode programming number of programme that you wish to If you make a mistake press F then enter the revised number. If you want to make other VIDEO Plus+ system recordings repeat stages 2 - 8. press @ / 1 to switch your unit to Standby. TIMER will appear in the DVD/VIDEO receiver's display while your DVD/VIDEO receiver waits to make the recording. [. . . ] When using a VIDEO, first press the VIDEO button. When using a DVD, first press the DVD button. The equipment connected with the audio cable is not set to receive DVD/VCR Receiver signal output. the audio cables are not connected securely. [. . . ]