User manual SONY DAV-D150G

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. The mains lead must only be changed at a qualified service shop. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] If you press X (PAUSE) during ITR, the DVD/VCR Receiver will enter the record pause mode and ITR is cancelled. Tapes can be paused for up to 5 minutes; RECP will be displayed when a tape is paused. After 5 minutes your DVD/VCR Receiver will stop recording to prevent damaging the tape or your DVD/VCR Receiver. Make sure that you have correctly connected your DVD/VCR Receiver as described earlier in this book. Press @ / 1 to turn on your DVD/VCR Receiver. A video 2 InsertDVD/VCRcassette with protection tab into your Receiver. The video cassette should have the window side facing up and the arrow facing away from you. Select programme numbers you wish to You may directly using the numerical buttons on the remote control. Wish record the 4 If you INPUTtoSELECTdirectly from either ofwish SCART sockets or AV3 sockets, repeatedly press until the socket you to record from is displayed. AV 1 for recording from EURO AV1 socket on the rear of your DVD/VCR Receiver. AV 2 for recording from EURO AV2 EXTERNAL socket on the rear of your DVD/VCR Receiver. AV 3 for recording from AV3 sockets (analog audio) on the front of your DVD/VCR Receiver. If you to record Long Play 5 Press SP/LPPlay. Wish picture andinsound quality, or Standard SP will produce improved however LP will provide twice as much recording time as SP. Notes If you do not wish to record on a tape (this can happen quite easily by accident! ) remove the protection tab on the back edge of the video cassette. It is possible to record on a video cassette with the record protection tab removed by covering the hole with self adhesive tape. Remember you can record one programme while watching another by starting your instant recording, pressing TV/VIDEO to disappear VIDEO indicator in the display window and then selecting a different channel on your TV. VIDEO Plus+ System greatly simplifies entering the date, channel, start and end times of a Timer recording by simply entering a PlusCode programming number. The PlusCode programming numbers are published in most TV guide magazines; they can vary from one to nine numbers in length. Insert a video cassette with protection tab into your DVD/VIDEO receiver. The video cassette should have the window side facing up and the arrow facing away from you. [. . . ] The power of the equipment connected with the audio cables is turned off. The disc is not placed within the guide. Forward Skip is not available during DVD playback. The remote control is too far from the DVD/VCR Receiver. [. . . ]