User manual SONY DAV-D150N

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. The mains lead must only be changed at a qualified service shop. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] Still picture quality can be improved slightly by pressing CH/PRESET (+/­) on the remote control. This feature automatically improves playback picture quality by adjusting your DVD/VCR Receiver to the condition of the tape. Picture search: During playback press either SLOW (m/t or M/T) buttons. This will enable you to rapidly wind the tape (7 times normal playback) while seeing where you are on the tape. logic search: During fast forward or rewind press and hold SLOW (m/t or M/T) button. The picture will be played back at 7 times normal playback speed. Please note you may set OPR only when playing back a tape. The DVD/VCR Receiver allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR): Starts recording immediately for a set period of time or until the video cassette runs out. sHOWVIEW System Recording greatly simplifies entering the date , channel , start and end times of a Timer Recording. Timer Recording: You may record at a later time (up to 1 month from the present). Up to 7 of these automatic recordings may be set. Wish record the 4 If you INPUTtoSELECTdirectly from either ofwish SCART sockets or AV3 sockets, repeatedly press until the socket you SHOWVIEW System greatly simplifies entering the date, channel, start and end times of a Timer recording by simply entering a SHOWVIEW programming number. The SHOWVIEW programming numbers are published in most TV guide magazines; they can vary from one to nine numbers in length. Insert a video cassette with protection tab into your DVD/VCR Receiver. The video cassette should have the window side facing up and the arrow facing away from you. If you want to record from either of the SCART sockets or AV3 on the front, repeatedly press INPUT SELECT for the correct display (AV1, AV2 or AV3). If you are recording from stations that do not broadcast VPS/PDC switch VPS/PDC off!DAILY: To record every day (except Saturday and Sunday) at the same time. Press b to select the recording speed and press V or v if you wish to record in SP, IP or LP. SP will produce improved picture and sound quality, however LP will provide twice as much recording time as SP. If PLEASE CHECK is displayed, you have entered incorrect information and will need to re-enter the data. Press the numerical to enter the 4 programme that you buttons record. [. . . ] When using a VIDEO, first press the VIDEO button. When using a DVD, first press the DVD button. The equipment connected with the audio cable is not set to receive DVD/VCR Receiver signal output. the audio cables are not connected securely. [. . . ]