User manual SONY DAV-DX375

[. . . ] 2-661-597-13(1) DVD Home Theatre System Operating Instructions DAV-DX355/DX375 ©2006 Sony Corporation 3 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Caution ­ The use of optical instruments with this product will increase eye hazard. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus. [. . . ] To erase the character, press C/c repeatedly until the character to be erased flashes, then press CLEAR. 1 Press D. TUNING. 2 Press the number buttons to select the frequency number you want to listen to. 3 Press Tip . 7 Tip Press . · If an FM program is noisy, press MENU, and select "FM MODE" by pressing X/x, then press . Press X/x to select "MONO, " then press . There will be no stereo effect, but the reception will improve. To restore the stereo effect, select "STEREO. " · To improve reception, reorient the supplied antennas (aerials). "COMPLETE" appears in the front panel display, and the station name is stored. · You can check the frequency by pressing DISPLAY repeatedly (page 59). 58US Viewing the station name or frequency in the front panel display When the system is set to "TUNER AM" or "TUNER FM, " you can check the frequency using the front panel display. Press DISPLAY. Each time you press DISPLAY, the display changes as shown. 1 Station name* 2 Frequency** * This is displayed if you have entered a name for a preset station. ** Returns to the original display when several seconds has elapsed. 59US Tuner Functions Manufacturer Code number Other Operations SAMSUNG SANYO SHARP TELEFUNKEN/ SABA THOMSON TOSHIBA ZENITH 515, 517, 544, 557, 566, 569, 574 508, 545, 567 517, 535, 565 530, 537, 547, 549, 558 530, 537, 547, 549 535, 541, 551 543, 567 Controlling the TV with the Supplied Remote By adjusting the remote signal, you can control your TV with the supplied remote. Note · When you replace the batteries of the remote, the code number may reset itself to the default (SONY) setting. Reset the appropriate code number. CATV Manufacturer Code number SONY 821, 824, 825 836, 837, 838, 839, 840 830, 831 806, 807, 808, 809, 810, 811, 812, 813, 814 841, 842, 843 816, 826, 832, 833, 834, 835 828, 829 815, 816, 817, 844 830, 831 826, 827 Controlling TVs with the remote Press and hold TV [/1 while entering your TV's manufacturer's code (see the table) using the number buttons. Then release TV [/1. HAMLIN/REGAL JERROLD JERROLD/GI OAK PANASONIC PIONEER SCIENTIFIC ATLANTA TOCOM/PHILIPS ZENITH If you set successfully the manufacturer's code, the TV button flashes twice slowly. If the setting is unsuccessful, the TV button flashes 5 times quickly. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. To control the TV You can control the TV by using following buttons. By pressing You can TV Manufacturer Code number SONY/AIWA DAEWOO FISHER GOLDSTAR/LG GRUNDIG HITACHI ITT/NOKIA JVC LOEWE MAGNAVOX PANASONIC PHILIPS PIONEER RCA/PROSCAN 501 (default) 503, 506, 515, 544 508, 545 503, 515, 517, 544, 568 533 503, 514, 515, 517, 544, 557 521, 522 516 515 503, 515, 517, 518, 544, 566 509, 553, 572 518, 557, 558 509, 525, 551 503, 510, 544 TV [/1 TV/VIDEO Turn the TV on or off. Switch the TV's input source between the TV and other input sources. Select the TV channel. TV VOL +/­* TV CH +/­* Number buttons* Select the TV channel. * To use these buttons while in the TV mode (the TV button flashes), press the TV button. MITSUBISHI/MGA 503, 527, 544, 566, 568 - is for selecting a channel number greater than 10. (For example, for channel 25, press -, then 2 and 5. ) Note · Depending on the TV, you may not be able to control your TV or to use some of the buttons above. · The TV mode turns off when you do not operate the remote for 10 seconds. 60US Using the THEATRE SYNC Function THEATRE SYNC allows you to turn on your SONY TV and this system, changes the system mode to "DVD, " and then switches the TV's input source you set with one button push. By pressing Number TV's input source TV/VIDEO 0 1 2 3 4 5 6 7 8 9* CLEAR* PICTURE NAVI* AUDIO* ANGLE* SOUND FIELD* MOVIE/ MUSIC* DYNAMIC BASS* No input source (Default) VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 VIDEO6 VIDEO7 VIDEO8 COMPONENT 1 COMPONENT 2 COMPONENT 3 COMPONENT 4 Preparing for the THEATRE SYNC function Register the TV's input source connected to this system. Press and hold TV/VIDEO while entering the code for the TV's input source connected to this system (see the table) using the number buttons. SUBTITLE* HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5 Other Operations The TV's input source is selected. If you successfully set the TV's input source code, the TV button flashes twice slowly. If the setting is unsuccessful, the TV button flashes 5 times quickly. Set your TV's input to the input you used to connect the system. For details, see the instructions of your TV. * Except for North American models. Operating for the THEATRE SYNC function Point the remote to the direction of TV and this system, then press THEATRE SYNC once. While transmitting the code from the remote, the TV button flashes. If this function does not work, change the transmit time. The transmit time varies depending on the TV. To change the transmit time Press and hold TV CH +* while entering the code for transmit time (see the table) using the number buttons. The transmit time from the remote is selected. If you successfully set the transmit time code, the TV button flashes twice slowly. [. . . ] (33) G Lights up when Super Audio CD/CD is loaded. H Lights up during MULTI channel playback. (Super Audio CD only) (49) I Lights up when the system outputs progressive signals (DVD function only). (26) J Indicates the selected [SPEAKER FORMATION]. (67) K Lights up when the DYNAMIC BASS is selected. [. . . ]