User manual SONY DAV-DZ120

[. . . ] 2-661-558-13(1) DVD Home Theatre System Operating Instructions DAV-DZ120 ©2006 Sony Corporation 3 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Caution ­ The use of optical instruments with this product will increase eye hazard. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus. [. . . ] You cannot play still pictures such as a menu. To return to PBC playback, press x twice, then press H. 52GB Tuner Functions To change the AM tuning interval (except for Russian model) The AM tuning interval can be set to either 10 kHz or 9 kHz. To change the AM tuning interval, first tune in any AM station, then turn off the system by pressing "/1 on the system. While holding down > (on the system), press "/1 on the system to turn on the power. If you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure. Presetting Radio Stations You can preset 20 FM stations, and 10 AM stations. Before tuning, make sure to turn down the volume to minimum. 1 2 Press FUNCTION repeatedly until "TUNER FM" or "TUNER AM" appears in the front panel display. Press and hold TUNING + or ­ until the auto scanning starts. Scanning stops when the system tunes in a station. "TUNED" and "ST" (for stereo program) appear in the front panel display. Tuner Functions 3 4 5 Press MENU. Press X/x repeatedly until "MEMORY" appears in the front panel display. Press ENTER. A preset number appears in the front panel display. 6 Press X/x to select the preset number you want. 7 Press ENTER. The station is stored. 8 Repeat 1 to 7 to store other stations. To change the preset number Restart from Step 1. 53GB Listening to the Radio Preset radio stations in the system's memory first (see "Presetting Radio Stations" (page 53)). Naming preset stations You can enter a name for preset stations. These names (for example, "XYZ") appear in the system's front panel display when a station is selected. Note that no more than one name can be entered for each preset station. 1 2 3 Press FUNCTION repeatedly until "TUNER FM" or "TUNER AM" appears in the front panel display. 1 2 3 4 The last received station is tuned in. Press PRESET + or ­ repeatedly to select the preset station you want. Press FUNCTION repeatedly until "TUNER FM" or "TUNER AM" appears in the front panel display. The last received station is tuned in. Press PRESET + or ­ repeatedly to select the preset station you want to create an index name for. Press X/x repeatedly until "NAME IN" appears in the front panel display. Each time you press the button, the system tunes in one preset station. Adjust the volume by pressing VOLUME +/­. To turn off the radio Press "/1. To listen to non-preset radio stations Use manual or automatic tuning in Step 2. For manual tuning, press TUNING + or ­ repeatedly. For automatic tuning, press and hold TUNING + or ­. The automatic tuning stops automatically when the system receives the radio station. To stop the automatic tuning manually, press TUNING + or ­. 5 6 Press ENTER. Create a name by using the cursor buttons. Press X/x to select a character, then press c to move the cursor to the next position. Letters, numbers, and other symbols can be input for a radio station name. To listen to radio stations when you know the frequencies Use direct tuning in Step 2. If you make a mistake Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character. To erase the character, press C/c repeatedly until the character to be erased flashes, then press CLEAR. 1 Press D. TUNING. 2 Press the number buttons to select the frequency number you want to listen to. 3 Press ENTER. Tip 7 Tip Press ENTER. · If an FM program is noisy, press MENU, and select "FM MODE" by pressing X/x, then press ENTER. [. . . ] Displays Super VCD as "SVCD. " Displays "MP3" in the Control Menu display 1 or "JPEG" in the Control Menu 2 for DATA CDs/DATA DVDs. the date for JPEG files. 2) 3) 4)Displays To turn off the display Press DISPLAY. List of Control Menu items Item Item Name, Function, Relevant Disc Type [TITLE] (page 32)/[SCENE] (page 32)/[TRACK] (page 32) Selects the title, scene, or track to be played. [CHAPTER] (page 32)/[INDEX] (page 32) Selects the chapter or index to be played. [TRACK] (page 32) Selects the track to be played. [ORIGINAL/PLAY LIST] (page 40) Selects the type of titles (DVD-RW/DVD-R) to be played, the [ORIGINAL] one, or an edited [PLAY LIST]. [TIME/TEXT] (page 32) Checks the elapsed time and the remaining playback time. Input the time code for picture and music searching. Displays the DVD/CD text or the MP3 track name. 88GB [SPEAKER FORMATION] (pages 62, 64) Sets the speaker formation. /Adjust the level of each speaker automatically. [PROGRAM] (page 34) Selects the track to play in the order you want. [SHUFFLE] (page 36) Plays the track in random order. [REPEAT] (page 37) Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/album repeatedly. [A/V SYNC] (page 44) Adjusts the delay between the picture and sound. [. . . ]