User manual SONY DAV-DZ210D

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] To erase the character, press C/c repeatedly until the character to be erased flashes, then press CLEAR. Before you can receive DAB, you must register the contents of broadcasts (service components) so that they can be received by the DAB tuner using the DAB INITIAL SCAN procedure. DAB INITIAL SCAN starts automatically when you select the "DAB" function for the first time after you purchase the system or after you cancel DAB INITIAL SCAN while scanning. RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly, or if the signal strength is weak. * Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Make sure that the DAB wire antenna (aerial) is connected to the ANTENNA DAB 75 jack on the rear of the unit (page 13). Make sure that the system turns on, and then select the "DAB" function. Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name* appears in the front panel display. * If an RDS broadcast is not received, the station name may not appear in the front panel display. When scanning is complete, "COMPLETE" appears in the front panel display momentarily and an available service component list is created. Before the DAB INITIAL SCAN procedure, make sure to turn the volume to minimum. If you move to another area, do the following to perform DAB INITIAL SCAN again in order to store the stations for your new area. Press FUNCTION repeatedly until "DAB" appears in the front panel display. Press X/x repeatedly until "INIT SCAN" appears in the front panel display. Press X/x repeatedly until "SCAN YES" appears in the front panel display. When scanning begins, "SCAN **" appears in the front panel display (** refers to a number of percent complete by 10%, But "%" does not appear in the front panel display). Depending on the DAB services available in your area, this may take a few minutes. When scanning is complete, "COMPLETE" appears in the front panel display momentarily and an available service component list is created. Press FUNCTION repeatedly until "DAB" appears in the front panel display. Press X/x repeatedly until "MEMORY" appears in the front panel display. [. . . ] Currently playing title number1) Currently playing chapter number2) Total number of titles1) Total number of chapters2) Control Menu items Playback status (N Playback, X Pause, x Stop, etc. Displays the scene number for VIDEO CDs (PBC is on), track number for VIDEO CDs/CDs, album number for DATA CDs/DATA DVDs. Displays the index number for VIDEO CDs, MP3 audio track number, or JPEG image file number for DATA CDs/ DATA DVDs. Selects the title, scene, or track to be played. [. . . ]