User manual SONY DAV-DZ310

[. . . ] Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Indoor use only. product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] while playing a CD), the system may not turn off automatically. 51GB Watching a DVD by a single button press (One-Touch Play) Press ONE-TOUCH PLAY screen and the front panel display of the system may differ. Tip · You can also operate the System Audio Control function via the TV menu. · You can operate the volume and mute control of the system via the TV remote. Your TV turns on, your TV's function is set to the HDMI input to which the system is connected, and the system starts playing a disc automatically. The System Audio Control function is also activated automatically. Limiting the volume level of TV sound from the system's speakers (Volume Limit) When the System Audio Control function is activated and TV sound is output from the system's speakers, the volume level is limited to the level that is set in [VOLUME LIMIT]. For details, see [VOLUME LIMIT] (page 64). Using the Theatre Mode (Theatre Mode) If your TV is compatible with the Theatre Mode, you can enjoy optimal image and sound quality suited for movies, and the System Audio Control function is activated automatically. Press THEATRE. Receiving the digital audio signal of your TV (Audio Return Channel) The system can receive the digital audio signal of your TV via an HDMI cable when your TV is compatible with the Audio Return Channel function. You can enjoy TV sound via the system by using just one HDMI cable. For details, see [AUDIO RETURN CHANNEL] (page 64). Enjoying TV sound from the speakers by this system (System Audio Control) To use this function, connect the system and your TV with a SCART (EURO AV) cable and an HDMI cable (page 26). Press [/1 to turn on the system while your TV is turned on. The System Audio Control function is activated. TV sound is output from the system speakers, and the volume of your TV's speakers is minimized automatically. Note Operating the system via the TV remote (Remote Easy Control) You can control the basic functions of the system via the TV remote when the system's video output is displayed on the TV screen. For details, refer to the operating instructions of the TV. · While your TV is in PAP (picture and picture) mode, the System Audio Control function will not work. When your TV exits PAP mode, the output method of your TV returns to the one before PAP mode. · When you turn the system on by pressing the function selection button, video and sound may not match. · Depending on the TV, when you adjust the system's volume, the volume level appears on the TV screen. If you do not do so, "PAIRING" and "INCOMPLETE" appear alternately in the front panel display. To continue pairing, press and start again from Step 5. To cancel pairing, press SYSTEM MENU. 7 Press SYSTEM MENU. · To set the ID of the unit, see "To set the ID of the unit" (page 54). · To set the ID of the surround amplifier, refer to the operating instructions of the surround amplifier. · To set the ID of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver. To cancel pairing Change the ID of the main and sub unit (page 54). 3 4 If wireless transmission is unstable For the surround amplifier For the S-AIR receiver If you use multiple wireless systems, such as wireless LAN or Bluetooth, the transmission of S-AIR signals or other wireless signals may be unstable. In this case, the transmission may be improved by changing the following "RF CHANGE" setting. Press SYSTEM MENU. Press X/x to select "PAIRING, " then press or c. The selected item appears in the front panel display. 5 After "START" appears in the front panel display, press . The unit starts pairing and "SEARCH" flashes in the front panel display. To cancel pairing, press SYSTEM MENU. 6 Start pairing of the S-AIR sub unit. x For the surround amplifier 1 2 Press SYSTEM MENU. Press X/x to select "RF CHANGE, " then press or c. Press "/1 on the surround amplifier to turn on the surround amplifier and press PAIRING on the rear panel of the surround amplifier. (To press PAIRING, a slim instrument, such as a paper clip, can be used. ) The PAIRING indicator of the surround amplifier flashes when pairing starts. [. . . ] Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer. · Contact your Sony dealer or local authorized Sony service facility. · The file you want to play is broken. [. . . ]