User manual SONY DAV-DZ610

[. . . ] Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Indoor use only. product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] Set the Control for HDMI function of your TV. 2 3 4 Using the Control for HDMI Function for "BRAVIA" Sync This function is available on TVs with the "BRAVIA" Sync function. By connecting Sony components that are compatible with the Control for HDMI function with an HDMI cable, operation is simplified as below: ­ System Power Off (page 49) ­ One-Touch Play (page 50) ­ Theatre Mode (page 50) ­ System Audio Control (page 50) ­ Audio Return Channel (page 50) ­ Remote Easy Control (page 50) ­ Language Follow (page 50) Control for HDMI is a mutual control function standard used by CEC (Consumer Electronics Control) for HDMI (High-Definition Multimedia Interface). Note For details of the setting of your TV, refer to the operating instructions of your TV. 5 On the system, press FUNCTION repeatedly to select "DVD/CD. " The selected item appears in the front panel display. Convenient Functions 6 7 8 9 Press DISPLAY while the system is in stop mode. [SETUP], Press X/x to select [CUSTOM], then press . Press X/x to select [HDMI SETUP], then press . . 10 Press X/x to select [CONTROL FOR 11 Press X/x to select [ON], then press Turning the system off in sync with your TV (System Power Off) When you turn your TV off by using the POWER button on your TV's remote or TV [/1 on the system's remote, the system turns off automatically. Note · Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions of the component. Preparing the Control for HDMI function (Control for HDMI - Easy Setting) If your TV is compatible with the Control for HDMI - Easy Setting function, you can set the system's [CONTROL FOR HDMI] function automatically by setting your TV. For details, refer to the operating instructions of your TV. If your TV is not compatible with the Control for HDMI - Easy Setting function, set the Control for HDMI function of the system and TV manually. · This function depends on the settings of your TV. For details, refer to the operating instructions of your TV. · Depending on the status of the system (ex. while playing a CD or listening to the radio), the system may not turn off automatically. 49GB Watching a DVD by a single button press (One-Touch Play) Press ONE-TOUCH PLAY screen and the front panel display of the system may differ. Tip · You can also operate the System Audio Control function via the TV menu. · You can store up to 150 files in a folder. · You can store up to 199 folders in a single USB device. · If a folder or file that you are trying to transfer already exists on the USB device with the same name, a sequential number is added after Note Convenient Functions · When the memory cannot be selected, [Operation not possible. ] appears on the TV screen. · The memory number changes depending on the USB device. · Select a transfer destination before transfer. Folder and file generation rules When transferring onto a USB device, a "MUSIC" folder is created directly below the "ROOT". Folders and files are generated within this "MUSIC" folder as follows according to the transferring method and source. · When transferring multiple tracks on an audio CD or multiple MP3 files on a DATA CD/ DATA DVD Source Folder name File name MP3 Audio CD Same as the transferring source1) "FLDR001"2) "TRACK001"3) · When transferring a single track on an audio CD or a single MP3 file on a DATA CD/ DATA DVD Source Folder name File name MP3 "REC1-MP3"4) Audio CD "REC1-CD"4) Same as the transferring source1) "TRACK001"3) 51GB · When transferring a radio program Folder name File name To select individual tracks/MP3 files/folders Press X/x to highlight the track/MP3 file/folder, then press to add a check in Step 5. To cancel the selection, highlight the track/MP3 file/folder, then press to remove the check. x For an audio CD Remaining space of the USB device USB TRANSFER 1 2 3 "FM001"4) 1)Up 2) 3) "TRACK001"3) to 64 characters of the name are assigned (including the extension). Folders are assigned in numeric order thereafter. Files are assigned in numeric order thereafter. new file is transferred in the "REC1-MP3" or "REC1-CD" folder each time single-track transferring is performed. 4)A Transferring tracks on an audio CD or MP3 files on a DATA CD/DATA DVD onto a USB device TRACK TRACK TRACK TRACK TRACK TRACK TRACK TRACK 01 02 03 04 05 06 07 08 START ALL ALL Tracks to be transferred 1 2 3 Load an audio CD/DATA CD/DATA DVD. Press DISPLAY while the system is in stop mode. [. . . ] If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. "OVERLOAD, " "REMOVE, " "USB, " then "PUSH PWR" appear. "LOCKED" appears and a disc cannot be ejected. · A problem has been detected with the level of electrical current from the (USB) port. [. . . ]