User manual SONY DAV-DZ710

[. . . ] ­ System Power Off: When you turn the TV off by using the POWER button on the TV's remote, the system turns off automatically. HDMI CONTROL is a mutual control function standard used by HDMI CEC (Consumer Electronics Control) for HDMI (high-definition multimedia interface). The HDMI CONTROL function will not operate in the following cases: ­ When you connect this system to a component which is not correspond with Sony's HDMI CONTROL function. ­ A component does not have a HDMI terminal. We recommend that you connect this system to products featuring `BRAVIA' Theatre Sync. Note · Do not use the THEATRE SYNC button on the remote while the HDMI CONTROL function is active. [. . . ] For details, see the operating instructions of the system. · Depending on the connected component, the HDMI CONTROL function may not work. Refer to the operating instructions supplied with the component. · When [HDMI CONTROL] is set to [ON] without being connected by the HDMI cord (not supplied), you can not switch to the TV input mode even if connected by SCART (EURO AV) cord. In this case, turn [HDMI CONTROL] to [OFF] (European models only). Preparing for the HDMI CONTROL function To use the HDMI CONTROL function, make sure that this system is connected to your TV (which should be correspond with HDMI CONTROL) by a HDMI cord (not supplied). Turn on the system and your TV, and then switch the input selector on your TV so that the signal from the system appears on the TV screen. Then set the respective HDMI CONTROL functions to on. The following explanation is for this system. · To output the sound from the TV, set [AUDIO (HDMI)] to [ON] on the system. For details, see the operating instructions of the system. 4GB To Enjoy STB (Set Top Box) digital sound or digital satellite tuner sound from the system (Models with DIGITAL IN (COAXIAL or OPTICAL) jack only) You can enjoy digital sound of STB or a digital satellite tuner from speakers of this system by performing to following connections and settings. Connect to a TV with the HDMI IN jacks by an HDMI cord (not supplied) (make sure to connect from the smallest number). The names of HDMI inputs in the following illustration are examples. By connecting as the following illustration, you can enjoy Multi Channel Broadcasted Audio from the speakers of the system. Video signal Sound signal TV to HDMI 2 (HDMI cord) to HDMI 1 (HDMI cord) DAV STB Digital Sound (Coaxial/Optical cord) Sets the [STB SYNCHRO] to [ON]. 1 2 3 4 5 6 7 Press "/1. Press DISPLAY when the system is in stop mode. . Press X/x to select Press X/x to select [CUSTOM], then press Press X/x to select [CUSTOM SETUP], then press Press X/x to select [STB SYNCHRO], then press Press X/x to select the setting. The default setting is underlined. · [OFF]: sets the [STB SYNCHRO] function to off. [. . . ] . Press X/x to select Press X/x to select [CUSTOM], then press Press X/x to select [CUSTOM SETUP], then press Press X/x to select [STB SYNCHRO], then press Press X/x to select the setting. The default setting is underlined. · [OFF]: sets the [STB SYNCHRO] function to off. · [ON]: sets the [STB SYNCHRO] function to on. 8 Press . The setting is made. [. . . ]