User manual SONY DAV-L8100

[. . . ] Take the 1. 5m audio/video cable supplied with your DVD player and connect the red colored RCA connector into the R AUDIO OUT terminal on the back of your DVD player. Connect the white colored RCA connector into the L AUDIO OUT terminal on the back of your DVD player. Note: Your DVD player offers two audio outputs numbered 1 and 2 R L 1 and two video outputs 1 numbered 1 and 2. You 2 2 may use either set of R L audio ouputs but make VIDEO OUT AUDIO OUT sure to use the video output that has the same number as the audio output you used. Locate the DVD/LD inputs, which can be found on the back of your receiver in the AUDIO INPUT section of your receiver. HOME THEATER S Y S T E M EASY HOOK-UP GUIDE FOR HOME THEATER PACKAGES VIDEO IN DVD/LD IN COAXIAL HT - DDW830 HT - 1300D HT - 5100D DAV-L7100 DAV-L8100 19. [. . . ] If all of the speakers in your system are identical, choose one of them for your Center Channel speaker. Ideally the Center Channel speaker should be aimed at your listening position. If you placed your speaker on top of your TV, you may need to aim it slightly down toward your listening position (seated). Tilting the center channel speaker too far forward may cause it to become unstable. If you placed this speaker below the TV, you may need to aim it up slightly at your listening position (seated). Left and Right FRONT Channel Speakers Before you begin making connections to your speakers, make sure that your receiver is not plugged into the wall. 5. Locate the FRONT speaker terminals on the back of your receiver. Take one of the supplied speaker wires and place one end of the plain wire into the L red ( + ) terminal of the FRONT speaker terminal. Place one end of the black-striped wire into the L black ( - ) terminal of the FRONT speaker terminal. Place the other end of the plain wire into the red ( + ) terminal on the back of the speaker that you placed to the left of your TV set. Place the other end of the blackstriped wire into the black (-) terminal on the back of the same speaker. Locate the FRONT speaker terminals on the back of your receiver. Take one of the supplied speaker wires and place one end of the plain wire into the R red ( + ) terminal of the FRONT speaker terminal. Place one end of the black-striped wire into the R black ( - ) terminal of the FRONT speaker terminals. FRONT R L 8. Place the other end of the plain wire into the red ( + ) terminal on the back of the speaker that you placed to the right of your TV set. Place the other end of the black-striped wire into the black ( - ) terminal of the same speaker. SURROUND Speakers + 11. Locate the SURROUND speaker terminals on the back of your receiver. Take one of the supplied speaker wires and place one end of the plain wire into the L red (+) terminal of the SURROUND speaker terminal. Place one end of the black-striped wire into the L black ( - ) terminal that can be found on the SURROUND speaker terminal. SURROUND R L + + Your left and right front channel speakers are now connected. Next, you'll connect your center channel speaker. R L 14. Place the other end of the plain wire into the red ( + ) terminal on the back of the surround speaker that you placed on the right side of your room. [. . . ] Locate the AUDIO OUT labeled SUB WOOFER on the back of your receiver. AUDIO OUT 13. Locate the SURROUND speaker terminals on the back of your receiver. Take one of the supplied speaker wires and place one end of the plain wire into the R red ( + ) terminal that can be found on the SURROUND speaker terminal. Place one end of the black-striped wire into the R black ( - ) terminal that can be found on the SURROUND speaker terminal. FRONT R L + R L B 10. Place the other end of the plain wire into the red ( + ) terminal on the back of the center channel speaker. [. . . ]