User manual SONY DAV-SB200

[. . . ] WARNING: Do not install this equipment in a confined space such as a book case or similar unit. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. [. . . ] If you set a rating for the DVD, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. if no suitable alternative is found , playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. If you forget your 4-digit password If you forget your password, to clear the current password follow the procedure below. 3 Enter a new password as shown above to the left (Rating). Enter the code of an area whose standards were used to rate the DVD video disc, referring to the list (See "Area Code List", page 36. To play from the beginning of the disc, press x twice, then press H (PLAY). Notes Depending on where you stopped the disc, the receiver may not resume playback from exactly the same point. The point where you stopped playing is cleared when: - Press x in the STOP mode. 2 Whenyoudouble-sided is facinginserted, make sure the a DVD is side want to play down. If display window, not start, appears in the and playback starts playback does press H (PLAY). In some cases, the disc menu might appear instead. A menu screen may appear automatically after loading a DVD. If a disc has more than one title, you can select another title as follows: Press DVD DISPLAY. Use V/v to select title icon, then press the appropriate number buttons (0-9), then use ENTER to select a title number. Press DVD DISPLAY, then use B/b to select a title number, then press ENTER. Use B/b/V/v buttons to select the title/chapter you want to view, then press ENTER to start playback. Use the number buttons to select the track you want to view. press RETURN to return to the menu screen. Menu setting and the exact operating procedures for using the menu may differ depending on the disc. [. . . ] Enter the appropriate code number for the initial setting "Area Code" (See page 21). Check the following guide for the possible cause of a problem before contacting service. The power is on, but the DVD Receiver does not work. Select the correct input mode of the audio receiver so you can hear the sound from the DVD Receiver. [. . . ]