User manual SONY DAV-TZ140

[. . . ] 4-299-353-12(1) WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. [. . . ] Press and hold SHIFT, then press the number buttons to select the desired number. 2 To display subtitles Press SUBTITLE during playback to select the desired subtitle language. (This applies to DVD VIDEOs only. ) 1 2 Press FM. Press and hold TUNING +/– for 2 seconds to start tuning until you find the desired radio station. “SEARCH +” or “SEARCH –” appears in the front panel display until a radio station with sufficient signal strength is found. Press and hold SHIFT, then press PROGRAM. “P 01” flashes in the front panel display. Press and hold SHIFT, then press the number buttons to select a preset number. Press to store the station frequency. To change the sound Press AUDIO repeatedly during playback to select the desired audio signal.  When the system is playing a DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, or MPEG audio), you can change the audio format. If the DVD VIDEO is recorded with multilingual tracks, you can also change the language.  With a VIDEO CD or CD, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers.  When playing a CD 1 2 3 4 5 With the label side up. 4 5 Press  to start playback. Press VOLUME +/– to adjust the volume. USB device  When playing a video/music/photo file Note 1 2 The selectable modes and their order differ  depending on the disc or file. To select a surround setting Press SURROUND to display the current mode. While the current mode is displayed, press SURROUND repeatedly to select the desired surround audio output mode. The selected mode appears in the front panel display. MULTI): When the  source is 2 channel, sound is output from all speakers. STANDARD): The  system discriminates the sound format of the source and presents sound as it was recorded/encoded. “DOLBY PL” (PRO LOGIC): Performs  Dolby Pro Logic decoding. “2CH ST” (2CH STEREO): All formats are  downmixed to 2 channels. 3 4 5 Press / to select a folder, then press and select a file. Press VOLUME +/– to adjust the volume. To select a preset radio station Note To play a VIDEO CD with PBC functions When you start playing a VIDEO CD with PBC (Playback control) functions, the menu for your selection appears. To play without using PBC In stop mode, press and hold SHIFT, then press the number buttons to select the track number you want. 1 2 Press FM. Press PRESET +/– to select a preset number. [. . . ] Set the [Control for HDMI] setting in  [General Setup Page] to [On]. Make sure that the connected component  is compatible with the Control for HDMI function. Check the connected component’s setting  for the Control for HDMI function. Refer to the operating instructions supplied with the component. USB device “OVERLOAD“ appears in the front panel display. [. . . ]