User manual SONY DC-J01

[. . . ] 3-232-712-21 (1) Portable CD Player Operating Instructions About the area code The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see "Accessories (supplied/optional). " "WALKMAN" is a trademark of Sony Corporation. D-CJ01 © 2001 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And don't place lighted candles on the apparatus. [. . . ] Be sure to turn off all connected devices before making connections. Notes · Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. · Use the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording. · Adjust the volume properly on the connected device so that the sound will not be distorted. When using the connecting cord If the sound is distorted, connect the device to the i jack. About the G-PROTECTION and SOUND functions when using the connecting cord · To record high quality CD sound, set the G-PROTECTION switch to "1. " · The SOUND function works only on the output sound from the i jack and not work on the output sound from the LINE OUT jack. to LINE OUT Connecting your CD player Connecting cord Left (white) Right (red) Stereo system, cassette recorder, radio cassette recorder, etc. 21 B Connecting to a power source You can use the following power sources: · Rechargeable batteries · AC power adaptor (see "Playing an audio CD or MP3 files") · LR6 (size AA) alkaline batteries For the battery life and charging time of the rechargeable batteries, see "Specifications. " 3 Connect the AC power adaptor to the DC IN 4. 5 V jack of your CD player and an AC outlet, then press x/CHARGE to start charging. x/CHARGE button Using the rechargeable batteries Charge the rechargeable batteries before using them for the first time. You can use only the following rechargeable batteries for your CD player. · NC-WMAA · NH-WM2AA to DC IN 4. 5 V 1 Open the battery compartment lid inside your CD player. AC power adaptor to an AC outlet 2 Insert two rechargeable batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place. The CD player charges the batteries. The "Charging" indicator turns on in the display, and the indicator sections of light up in succession. When the batteries are completely charged, the "Charging" and indicators turn off. If you press x/CHARGE after the charge has already been completed, the indicator flashes and "FULL" appears in the display. 4 Disconnect the AC power adaptor. 22 To remove the rechargeable batteries Remove the batteries as illustrated below. When to replace the rechargeable batteries If the battery life becomes shorter by about half, replace the batteries with new rechargeable batteries. Note on the rechargeable batteries If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times. When to charge the rechargeable batteries You can check the remaining power of the batteries in the display. Battery power is full. r r r r Note on carrying the rechargeable batteries Use the supplied battery carrying case to prevent unexpected heat. If the rechargeable batteries and the metallic objects are contacted, heat or fire may occur due to a short circuit. To attach the battery compartment lid If the battery compartment lid is detached by an accidental drop, excessive force, etc. , attach it as illustrated below. Battery power is getting low. Battery power is low. r Connecting to a power source Lo batt* Batteries are depleted. * Beep sounds. To keep the original battery capacity for a long time, charge the batteries only when they are completely depleted. Notes · The indicator sections of roughly shows the remaining battery power. One section does not always indicate one-fourth of the battery power. · Depending on operating conditions, the indicator sections of may increase or decrease. 23 Using the dry batteries Use only the following dry battery type for your CD player: · LR6 (size AA) alkaline batteries Note Be sure to remove the AC power adaptor when using the dry batteries. Notes on the power source Disconnect all power sources when the CD player is not used. On AC power adaptor · Use only the AC power adaptor supplied or recommended in "Accessories (supplied/ optional). " Do not use any other AC power adaptor. It may cause a malfunction. Polarity of the plug 1 2 Open the battery compartment lid. Insert two LR6 (size AA) batteries by matching the 3 to the diagram in the battery compartment. To remove the batteries Remove the batteries in the same way as rechargeable batteries. When to replace the batteries You can check the remaining power of the batteries in the display. Battery power is full. r r r r · When disconnecting the AC power adaptor from the AC outlet, grasp the adaptor itself. · Do not touch the AC power adaptor with wet hands. On rechargeable batteries and dry batteries · Do not charge the dry batteries. · Do not throw the batteries into fire. [. . . ] You cannot operate the CD player properly using the remote control. c The CD player is reading the information on the CD. c The buttons on the CD player are kept pressed by mistake. Additional information 27 Specifications System Compact disc digital audio system Battery life* (approx. hours) (When you use the CD player on a flat and stable surface. ) Playing time varies depending on how the CD player is used. Figures in brackets show the playing time of MP3 files. Laser diode properties Material: GaAlAs Wavelength: = 780 nm Emission duration: Continuous Laser output: Less than 44. 6 µW (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. ) When using Two NC-WMAA (charged for about 3 hours**) NH-WM2AA (charged for about 5 hours**) Two Sony alkaline batteries LR6(SG) (produced in Japan) G-PROTECTION function "1" "2" 10. 5 [8] 22. 5 [18] 31. 5 [24] 10. 5 [8] 23 [18] 32 [24] D-A conversion 1-bit quartz time-axis control Frequency response 20 - 20 000 Hz 307) +1 ­2 dB (measured by JEITA CP- Output (at 4. 5 V input level) Line output (stereo minijack) Output level 0. 7 V rms at 47 k Recommended load impedance over 10 k Headphones (stereo minijack) Approx. 5 mW + Approx. [. . . ]