User manual SONY DC-J506CK

[. . . ] 3-240-975-11 (1) Portable CD Player Operating Instructions About the area code The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see "Accessories (supplied/optional). " "WALKMAN" is a trademark of Sony Corporation. D-CJ506CK © 2002 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And don't place lighted candles on the apparatus. [. . . ] However, you can turn off the backlight to save the battery power. 1 2 Remove the power source (dry batteries or AC power adaptor) from the CD player. Connect the power source while pressing x on the CD player. 1 2 Remove the dry batteries from the CD player. Insert the batteries while pressing MENU. To turn on the beep sound Remove the power source and then connect the power source without pressing x. To turn on the LCD's backlight Remove the batteries and then insert the batteries without pressing MENU. Available features About the LCD's backlight The LCD's backlight is always turned on when using the AC power adaptor. 19 B Connecting your CD player Connecting a stereo system You can listen to CDs through a stereo system and record CDs on a cassette tape. For details, see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. Notes · Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. · Use the AC power adaptor for recording. If you use the dry batteries as a power source, batteries may become completely depleted during recording. · Adjust the volume properly on the CD player and connected device so that the sound will not be distorted or noisy. to i About the G-PROTECTION and SOUND functions when using the connecting cord To record high quality CD sound, set the GPRO switch to "1. " Adjust the volume. Connecting cord Left (white) Right (red) Stereo system, cassette recorder, radio cassette recorder, etc. 20 B Installing in a car Where to place your CD player · Install the CD player in a location which: ­ does not interfere with your driving. ­ does not interfere with the glove box lid or ashtray. ­ is stable, and where nothing around it may interfere with installation. · Do not install the CD player near heat sources or where subject to direct sunlight, excessive dust, or moisture (especially on a dashboard. ) Please understand that we will not incur any obligations for troubles caused by incorrect installation. If you have any questions or problems concerning your CD player, please contact your nearest Sony dealer. Notes · Do not affix Velcro tapes to the name plate or the lid of the battery compartment. · When you are going to park your car for a long period of time, remove the CD player from the Velcro tapes so that it will not be exposed to direct sunlight. Note on the car battery cord The 4. 5V DC plug supplied with car battery cord conforms to the proposed standards of the Japan Electronics and Information Technology Industries Association (JEITA). Do not connect it to other players. Polarity of the plug (JEITA standards) Mounting your CD player Attach the CD player to the console box with the supplied Velcro tapes. Bottom of the CD player Installing in a car Console box 21 Replacing the fuse of the car battery cord If the CD player does not operate, check the fuse. If it is blown, replace it as follows: Notes on the car connecting pack · If no sound is heard or the car connecting pack is ejected, change the direction of playback on the car cassette deck. · Never insert the cord end of the car connecting pack into the cassette insertion door. Otherwise, the cord may break or the car cassette deck may be damaged. · You cannot use the car connecting pack with some car cassette deck. · The cord should be placed so that it does not hinder driving. · To disconnect the cord from the CD player, pull it out by grasping the plug. · With some car cassette decks, you may hear some rattling noise from the car connecting pack. However, this is not a sign of malfunction. 1 2 3 4 5 Turn off the CD player and remove the cigarette lighter plug from the cigarette lighter socket. [. . . ] While playing an MP3 file in c If you use an MP3 file that was compressed with a transfer bit rate the forward or reverse setting other than "128kbps, " this phenomenon may happen. We direction quickly, indications recommend setting the bit rate to "128kbps. " on the display become unstable. Symptom Additional information 27 Specifications System Compact disc digital audio system Battery life* (approx. hours) (When you use the CD player on a flat and stable surface. ) Playing time varies depending on how the CD player is used. Figures in brackets show the playing time of MP3 files. Laser diode properties Material: GaAlAs Wavelength: = 780 nm Emission duration: Continuous Laser output: Less than 44. 6 µW (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. ) When using Two Sony alkaline batteries LR6(SG) (produced in Japan) G-PROTECTION function "1" "2" 32 30 [24] [24] D-A conversion 1-bit quartz time-axis control * Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association). Frequency response 20 - 20 000 Hz 307) +1 ­3 dB Operating temperature 5°C - 35°C (41°F - 95°F) (measured by JEITA CP- Output (at 4. 5 V input level) Headphones (stereo minijack) Approx. 5 mW + Approx. [. . . ]