User manual SONY DCR-DVD602E

[. . . ] · CPU: MMX Pentium 200 MHz or faster · Application: Windows Media Player (this must be installed to play back movies. ) · Others: USB port (this must be provided as standard), disc drive For Macintosh users b Note · When you connect your camcorder to a Macintosh computer using a USB cable, you cannot copy pictures recorded on a tape to the computer. To copy pictures, connect your camcorder to the computer with an i. LINK cable and use the standard software in the OS. System requirement For Windows users When viewing pictures recorded on a tape on a computer · OS: Microsoft Windows 98SE, Windows 2000 Professional, Windows Millennium Edition, Windows XP Home Edition or Windows XP Professional Standard installation is required. Operation is not assured if the above OS has been upgraded. You cannot hear sound if your computer is running Windows 98. [. . . ] The remaining time appears on the computer screen. . 2 Double-click [Picture Package Menu] icon on the desktop. [Picture Package Menu] starts up. 3 4 11Click [No] when you want to finish. . . Click [Save the images on CD-R]. [Picture Package CD Backup] starts up. Open the desired folder on the left side of the screen, select pictures you want to save. The selected picture is marked with . Managing pictures on a Windows computer To create another copy with the same content, click [Yes], then place a new CDR in the disc drive. 5 b Note · Any and all third party musical contents you may acquire from CDs, the Internet or other sources are the copyrighted work of the respective owners thereof, and except to the extent protected by applicable laws, you are not permitted to use any of the third party musical contents. Please refer to "On Copyrights" of "Read this first" above-mentioned (p. 3) for further note on your use of such third party musical contents. z Tip · If you select CD-R for where to save, you can view the created slide show as a video CD. For details . Click the [View selected pictures] tab, and make sure the desired pictures are selected. on playback of video CDs, see page 25. 6 Saving the images on CD-R ­ Picture Package CD Backup You can save pictures copied on the computer, as a backup, to a CD-R. . Click [Write to CD-R]. 1 Turn on the computer. , continued Managing pictures on a Windows computer 23 Place a new CD-R in the disc drive. b Note · CD-RWs cannot be used. The following procedure describes how to create a Video CD from a picture recorded on a tape (maximum length of about one hour). b Notes · Some models are not compatible for this operation. Regarding supported models, check to see if there is a listing for the Burn VCD feature in the index of the separate Camera Operations Guide. · You can only use a USB cable for this operation. You cannot use an i. LINK cable. 7 Click [Start]. 1 Saving to a CD-R starts. The remaining time appears on the computer screen. . Turn on the computer. Prepare the power source for your camcorder, then slide the POWER switch repeatedly to select the PLAY/ EDIT mode. Use the supplied AC Adaptor as the power source since it takes a few hours to create a Video CD. ­ a DVD player compatible with Video CDs ­ a computer equipped with a DVD drive and software compatible with Video CDs ­ a computer equipped with Windows Media Player (You may not be able to play back the Video CD depending on the computer environment, including such factors as the operating system or the hardware. The menu functions of Windows Media Player do not work. ) The following procedure describes how to play back a Video CD using Windows Media Player. 3 Prepare the power source for your camcorder, then slide the POWER switch repeatedly to select the PLAY/ EDIT mode. The name of the power switch on the camcorder varies depending on the model. 4 Set [STD-USB] in the menu settings of your camcorder to on. The procedure of the menu settings varies depending on the model. For details, refer to the separate Camera Operations Guide supplied with your camcorder. 1 Place a Video CD in the disc drive of your computer and start up Windows Media Player. For Windows XP Click [Start], [All Programs], [Accessories], [Entertainment], then [Windows Media Player]. For other operating systems Click [Start], [Programs], [Accessories], [Entertainment], then [Windows Media Player]. 5 Connect your camcorder to the computer via the USB cable (supplied) (p. 12). Click if [Picture Package Menu] starts up automatically. 6 Start up [MEMORY MIX Image Tool]. For Windows XP Click [Start], [All Programs], [Picture Package], [Handycam Tools], then [MEMORY MIX Image Tool]. For other operating systems Click [Start], [Programs], [Picture Package], [Handycam Tools], then [MEMORY MIX Image Tool]. 2 Open [My Computer], [CD-R], then [MPEGAV]. Then, drag and drop the movie file [sss*. DAT] onto the Windows Media Player screen. * sss indicates the actual file name. Copying images for MEMORY MIX to a "Memory Stick" (only the models with a Memory Stick slot) You can copy images for the MEMORY MIX function to a "Memory Stick. " Refer to the separate Camera Operations Guide supplied with your camcorder for details on the MEMORY MIX function. 7 . Click [Copy]. 1 2 Turn on the computer. Insert a "Memory Stick" into your camcorder. After copying is finished, a new folder appears. 26 Managing pictures on a Windows computer Normally, a new folder is automatically created with a number one higher than the last created folder. b Note · You cannot copy pictures when all folders from 100 to 999 are used. Managing pictures on a Windows computer Managing pictures on a Windows computer 27 Connecting to a Macintosh computer Connecting your camcorder to a computer 1 2 Insert a "Memory Stick" into your camcorder. Prepare the power source for your camcorder, then slide the POWER switch repeatedly to select the PLAY/ EDIT mode. Use the supplied AC Adaptor as the power source. The name of the power switch on the camcorder varies depending on the model. [USB MODE] appears on the LCD screen of your camcorder, and a "Memory Stick" icon appears on the desktop. To disconnect the USB cable/ To turn off the camcorder/To eject the "Memory Stick" 1 Quit all applications running on the computer. 2 Drag and drop the "Memory Stick" or drive icon on the desktop onto the [Trash] icon. 3 Disconnect the USB cable from the camcorder and computer. b Note · If you are using Mac OS X, turn off the computer before disconnecting the USB cable and ejecting the "Memory Stick". 3 Set [STD-USB] in the menu settings of your camcorder to on. The procedure of the menu settings varies depending on the model. 4 Connect the USB cable (supplied) to the USB jack on your camcorder. The location of the USB jack varies depending on the model. [. . . ] · The computer does not recognize the "Memory Stick" during camcorder operation such as tape playback or editing. cFinish camcorder operation before connecting the camcorder to the computer. cClose [Picture Package], then restart the computer. cClose [Picture Package] first, then set the POWER switch on your camcorder to another mode. [Picture Package] does not function correctly. [. . . ]