User manual SONY HANDYCAM DCR-DVD610 HOW TO TAKE GREAT VACATION VIDEO.

[. . . ] When you execute [Setup. exe], the [Setup. exe] file and [Install] folder stored in the [Storage Media] folder of the player are copied to your computer for backup, and WALKMAN Guide and Content Transfer are installed to your computer. Return to the previous screen. Charging About 2 hours Fully-charged SensMeTM Channels Followtheon-screeninstructions. After executing [Setup. exe], the WALKMAN Guide shortcut appears on the desktop of your computer. With the player connected to your computer, when installation of bundled software is completed, Content Transfer starts automatically. Charging. . . Hint After executing [Setup. exe] you can use the free space in the [Storage Media] folder more effectively by formatting the built-in flash memory of the player. To format the built-in flash memory of the player, see "To initialize (format) the player" on the backside. Settings Turning the Player On and Off To turn on To turn off Press any button. Press and hold the OPTION/PWR OFF button. 5 Double-click (WALKMANGuide)onthe desktoptostarttheWALKMANGuide. For details on transferring music, refer to the User Guide included in the WALKMAN Guide. Parts and Controls BACK/HOME button 5-way button*1 (play/pause/confirm) button / buttons / buttons Troubleshooting If the player does not function as expected, try the following steps to resolve the issue. 1 Find the symptoms of the issue in "Troubleshooting" in the User Guide (HTML document), and try any corrective actions listed. For details on connecting to a computer, see the tables on the right. Headphone jack WM-PORT jack 2 3 Connect the player to your computer to charge the battery. You may be able to resolve some issues by charging the battery. Connect the USB cable (supplied), or peripheral devices (not supplied). Display VOL +*1/­ button OPTION/PWR OFF button HOLD switch Strap hole RESET button Use a small pin, etc. Press the RESET button with a small pin, etc. If you press the RESET button while operating the player, stored data and player settings may be lost. RESET button Press to display the option menu. [. . . ] If you press and hold the OPTION/PWR OFF button, the screen turns off and the player enters standby mode. 4 5 6 Check information on the issue in the Help of each software. Look up information on the issue on one of the customer support Web sites. About the customer support Web sites, see "For the latest information". If the approaches listed above fail to resolve the issue, consult your nearest Sony dealer. *1 There are tactile dots. Use them to help with button operations. Symptom Cause/Remedy The player cannot charge The USB cable is not connected to a USB connector the battery. Disconnect the USB cable, and then reconnect it. The battery is charged in an ambient temperature out of the range of 5 °C (41 ºF) to 35 °C (95 ºF). icon You cannot charge the battery when appears. Charge the battery in an ambient temperature of 5 °C (41 ºF) to 35 °C (95 ºF). Your computer has entered Sleep or Hibernation status. Release the computer from Sleep or Hibernation status. Connecting the player via a USB hub may not work. Connect the player to your computer using the USB cable (supplied). The computer is running another software other than the one used for transferring. Disconnect the USB cable, wait a few minutes, and reconnect it. If the problem persists, disconnect the USB cable, restart the computer, and then reconnect the USB cable. The player cannot be operated. ] or [Connected USB (MTP). The player cannot be operated. ] may not appear on the player, depending on the software environment that is running on your computer. Activate Windows Media Player, or Windows Explorer. A USB hub or USB extension cable is being used. Connecting the player via a USB hub or extension cable may not work. Connect the player directly to your computer using the USB cable (supplied). Install the bundled software after installing Windows Media Player 11 or 12. For details on Windows Media Player, refer to the following web site: http://support. microsoft. com/ Precautions To initialize (format) the player You can format the built-in flash memory of the player. [. . . ] Install the bundled software after installing Windows Media Player 11 or 12. For details on Windows Media Player, refer to the following web site: http://support. microsoft. com/ Precautions To initialize (format) the player You can format the built-in flash memory of the player. If the memory is formatted, all files including the User Guide (HTML document) will be erased and all setting values returned to their defaults. Be sure to verify the files stored in memory prior to formatting, and then export any necessary files to the hard disk of your computer or other device beforehand. [. . . ]