User manual SONY DCR-DVD653E

[. . . ] No compensation for your recordings Contents of the recording cannot be compensated for if recording or playback of attached or downloaded files is not made due to a malfunction, problems with storage media, etc. precautions · Before using the network function, be sure to set up the clock of the camcorder. for details , refer to the operating instructions of the camcorder. If you use the network function without setting the clock, you may not be able to send or receive e-mail, or view a Web page. [. . . ] Tip The last-used address is listed next to [ New]. Note The total number of characters you can enter is 24. You can select the text from the message list, or modify it to suit your purposes. The list shows messages that were made previously. When you choose to use the selected text, select [OK], then press the centre z on the control button. after you select the message , go to "4 Sending e-mail" on page 34. If you modify the selected text, select [Edit], then press the centre z on the control button. Note The total number of characters you can enter is 512. Tip You can send an e-mail message with your signature. When dialling other telephone numbers Select [TEL No. Select the desired telephone number, then press the centre z on the control button. You can register frequently used e-mail addresses in the address book. Be careful to enter the address correctly. For details on how to open the Network Menu, refer to "Accessing the network" in the operating instructions supplied with your camcorder. Note The total number of characters you can enter in the [Name] box is 24. When you reply to the address of a previously received e-mail message, the address will be automatically registered on the address book. To edit the address, see "Editing the address book" below. You can edit the names or e-mail addresses in the address book. (2) Select the area where the name and address are indicated, then select the address you want to edit using the control button b/B, then press the centre z on the control button. When modifying the name, select [Name], and when modifying the address, select [Address]. Selecting the destination address from the address book You can select the destination address from the address book. (2) Select the area where the name and address are indicated, then select the destination address using the control button b/B. [. . . ] When you know that the page is safe, select [OK], then press the centre z on the control button. You cannot display this page on the camcorder. The DNS entry on the PPP screen during manual setup may be wrong. The page memo cannot be stored while the unit is loading a Web page. [. . . ]