User manual SONY HANDYCAM DCR-DVD810 HOW TO SHOOT A GREAT WEDDING VIDEO.

[. . . ] 4 Remote Commander and Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Network Using Network Features . . . . . . . . . . . . . . . . . . . 29 Displaying the Control Window of the Projector with a Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Confirming the Information regarding the Projector . . . . . . . . . . . . 30 Operating the Projector from a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Using the Mail Report Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Preparation Connecting the Projector . . . . . . . . . . . . . . . . . . . 8 Connecting a Computer . . . . . . . . . . . . . . . . 9 Connecting an External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] *2: When "Standby Mode" is set to "Low, " the network and network control function cannot be operated while the projector is in standby mode. The Connection/Power Menu 25 The Installation Menu The Installation menu is used for installing the projector. Setting items Image Flip Installation Attitude Description HV/H/V/Off: Flips the projected image horizontally and/or vertically according to the installation method. Right Side UP/Upside Down/Front Up/Front Down: Change the cooling setting to suit to the installation attitude. Continuing to use the wrong setting may affect component reliability. Front Up Right Side Up Upside Down Front Down High Altitude Mode*1 Screen Aspect*2 V Keystone*3 *4 On/Off: Set to "On" when using the projector at an altitude of 1, 500 m or higher. Continuing to use the wrong setting may affect component reliability. 16:10/16:9/4:3: For switching the display area to suit to the screen. The higher the setting, narrower the top of the projected image. The lower the setting, the narrower the bottom. Panel Alignment*2 *5 This feature allows you to adjust the gaps in the color of characters or the picture. When set to "On, " "Adjust Color" and "Pattern Color" can be assigned and adjusted. Adjust Item: Selects how to make adjustments from below. Shift: Shifts the whole picture and makes adjustments. Zone: Selects the desired range and makes adjustments. The following window appears in the Web browser: LAN Connector Network Hub or router, etc 2 Set the network settings for the projector using "Network Setting" on the Connection/Power menu (page 25). Start a web browser on the computer, enter the following in the address field, then press the Enter key on your computer. http://xxx. xxx. xxx. xxx (xxx. xxx. xxx. xxx: IP address for the projector) Once you make the network settings, you can open the Control window only by performing step 3 of this procedure. 3 Using Network Features 29 How to operate the Control window Switching the page Click one of the Page Switching buttons to display the desired setting page. Confirming the Information regarding the Projector You can confirm the current settings for the projector on the Information page. Page Switching buttons Setting the access limitation You can limit a user for accessing any particular page. Administrator: Allowed access to all pages User: Allowed access to all pages except the Setup page Set under [Password] of the Setup page. When you access the Setup page for the first time, enter "root" for user name and enter nothing for password. The name of the administrator is preset to "root. " Information area Operating the Projector from a Computer You can control the projector from the computer on the Control page. Entry area for [Administrator] Entry area for [User] Operation area When you change the password, input a new password after deleting the password (*****) that was set. Note The functions of the keys shown in the operation area are the same as those of the keys on the supplied Remote Commander. If you forget your password, consult with qualified Sony personnel. Using the Mail Report Function Set the Mail Report function on the Setup page. Entered values will not be applied unless you click on [Apply]. 30 Using Network Features 1 Click on [Owner information] to enter the owner information recorded in the Mail Report. 3 Enter the outgoing e-mail address in the Email Address box then check the Report Timing check box of the Mail Report to be sent. Set the mail account for sending mail reports. Mail Address: Enter the e-mail address. Outgoing Mail Server (SMTP): Enter the address of outgoing mail server (SMTP). Required Authentication: Check this check box if authentication is required for sending e-mail. Requires the use of POP Authentication before send email (POP before SMTP): Check this check box to arrange for POP authentication to be performed before sending e-mail. Incoming Mail Server (POP3): Enter the address of the incoming-mail server (POP3) to be used for POP authentication. [. . . ] 6 Pin assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Power Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Primary DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]