User manual SONY DCR-DVD92E

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] If you use a tape with cassette memory, you can superimpose the titles while recording or after recording. When you playback the tape, the title is displayed for 5 seconds from the point where you superimposed it. You can select from eight preset titles and two original titles (CUSTOM1, CUSTOM2) to superimpose over the picture. (7) Press the control dial again to complete the setting. While you are playing back, pausing, or recording After step 7, the "TITLE SAVE" indicator appears on the screen for 5 seconds and the title is set. And when you press START/STOP to start recording, "TITLE SAVE" appears on the screen for 5 seconds and the title is set. When you want to use the original title, select in step 2. notes on superimposing a title · If you have not given any original title, "­ ­ ­ ­ . The FADER function works while the title is displayed, however, the title does not fade. Title colour changes as follows : WHITE ~ YELLOW ~ VIOLET ~ RED ~ CYAN ~ GREEN ~ BLUE Title size changes as follows : SMALL ~ LARGE Title position changes as follows : When you select the title size "SMALL", you can choose 9 positions. When you select the title size "LARGE" , you can choose 8 positions. If it takes more than 5 minutes to make a title If the Standby mode lasts for more than 5 minutes with a cassette inserted, the power will be turned off automatically. If the power is turned off while you are making a title, set the POWER switch to OFF once, then to CAMERA. The title you have made remains stored in memory. Set the POWER switch to PLAYER or eject a cassette so that the power does not go off. If you use a tape with cassette memory, you can label a cassette. the label can consist of up to 10 characters and is stored in cassette memory. When you insert the labeled cassette and set the POWER switch to PLAYER, the label is displayed for about 5 seconds on the LCD screen, in the viewfinder or on the TV screen. (5) Turn the control dial to select the column of the desired character, then press the control dial. (6) Turn the control dial to select the desired character, then press the control dial. In step 5 turn the control dial to select [M], then press control dial. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. [. . . ] Otherwise, you cannot attach the tripod securely and the screw may damage the camcorder. LINK" mark is a trademark of Sony Corporation and indicates that this product is in agreement with IEEE 1394-1995 specifications and their revisions. To use the Remote Commander, you must insert two R6 (size AA) batteries. (2) Insert both of the R6 (size AA) batteries with correct polarity. [. . . ]