User manual SONY DCR-HC14E

[. . . ] A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS1362 (i. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. [. . . ] For the compatible drive, visit the following URL: http://www. Operation is not assured if the above OS has been upgraded. CPU: MMX Pentium 200MHz or faster Application: Windows Media Player (This must be installed to play back movies. Refer to the Help guide for further detailed operations after reading the "First Step Guide" thoroughly. Operation is not assured if the above OS has been upgraded. CPU: Intel Pentium III 500 MHz or faster (800 MHz or faster recommended) (For using ImageMixer VCD2, Intel Pentium III 800 MHz or faster recommended) Before referring to the "First Step Guide" on your computer (continued) , with the supplied CD-ROM on your computer before connecting your camcorder and your computer. Once you install it, the installation is not required thereafter. The software to be used varies depending on the OS system you are using. 5 or later) CPU: iMac, eMac, iBook, PowerBook, PowerMac G3/G4/G5 series Memory: 128 MB or more Hard disk: Available memory required for installation: 250 MB or more Available free hard disk space recommended: 4 GB or more (depending on the size of the image files edited) Display: Minimum 1 024 × 768 dots, 32 000 colors (This product will not operate correctly at less than 1 024 × 768 dots or 256 colors. ) Application: QuickTime 4 or later (QuickTime 5 recommended) Other: Disc drive When only copying pictures recorded on a "Memory Stick Duo" on a computer OS: Mac OS 9. 0 or later (This must be installed to play back movies. If it is not installed on your computer, you can download it from the Adobe Systems web page: http://www. You can create DVDs when you connect your camcorder to a Sony VAIO series computer* that supports "Click to DVD" via an i. The picture is automatically copied and written to a DVD. The following procedures describe how to create a DVD from a picture recorded on a tape. For system and operation requirements, visit the following URL: ­ Europe http://www. * Note that you need a Sony VAIO computer equipped with a DVD drive that can be used to write DVDs. You also need the computer with "Click to DVD Ver. Using the Direct Access to "Click to DVD" function for the first time The Direct Access to "Click to DVD" function enables you to copy pictures recorded on a tape to a DVD easily if your camcorder is connected to a computer. Before operating the Direct Access to "Click to DVD" function, follow the steps below to start "Click to DVD Automatic Mode Launcher. Select [Click to DVD] from the programs displayed, then click [Click to DVD Automatic Mode Launcher]. After you start up [Click to DVD Automatic Mode Launcher] once, from then on it starts up automatically when you turn on your computer. [. . . ] Store in a well-ventilated location subject to little dirt or dust. It is recommended that you operate your camcorder about once a month to keep it in optimum state for a long time. Discard used batteries according to the manufacturer's instructions. Do not use batteries other than the CR2025. [. . . ]