User manual SONY DCR-HC24E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9. To reduce fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. [. . . ] You can view the video and still images copied from your camcorder by selecting from thumbnails. "First Step Guide" is an instruction manual you can refer to on your computer. This "First Step Guide" describes basic operations, from initial hookup of your camcorder and computer and making settings, to general operation the first time you use the software stored on the CDROM (supplied). Sound system: 16 bit stereo sound card and stereo speakers Memory: 64 MB or more Hard disk: Available memory required for installation: 500 MB or more Available free hard disk space recommended: 6 GB or more (depending on the size of the image files edited) Display: 4 MB VRAM video card, Minimum 800 × 600 dots, High Color (16 bit color, 65, 000 colors), DirectDraw display driver capability (This product will not operate correctly at less than 800 × 600 dots, or 256 colors or less. LINK cable), disc drive (You need a CD-R drive to create a video CD. For the compatible drive, visit the following URL: http://www. Refer to the Help guide for further detailed operations after reading the "First Step Guide" thoroughly. Operation is not assured if the above OS has been upgraded. CPU: Intel Pentium III 500 MHz or faster (800 MHz or faster recommended) (For using ImageMixer VCD2, Intel Pentium 4 1. 5 or later) CPU: iMac, eMac, iBook, PowerBook, Power Mac G3/G4/G5 series Memory: 128 MB or more Hard disk: Available memory required for installation: 250 MB or more Available free hard disk space recommended: 4 GB or more (depending on the size of the image files edited) Display: Minimum 1, 024 × 768 dots, 32, 000 colors (This product will not operate correctly at 1, 024 × 768 dots or less, or 256 colors or less. Before referring to the "First Step Guide" on your computer (Continued) When you connect your camcorder to a Macintosh computer using a USB cable, you cannot copy pictures recorded on a tape to the computer. To copy recordings from a tape, connect your camcorder to the computer with an i. , with the supplied CD-ROM on your computer before connecting your camcorder and your computer. Once installed, no further installation will be necessary. The software to be used varies depending on the computer's operating system you are using. Close all applications running on the computer before installing the software. * Drive names (such as (E:)) may vary depending on the computer. [I accept the terms of the license agreement] if you agree, then click [Next]. " Depending on the computer's operating system, a message may appear notifying you that "First Step Guide" cannot be installed automatically with the InstallShield Wizard. In such a case, manually copy "First Step Guide" to your computer according to the message instructions. 8 Select where to save the DirectX(R)] screen is displayed, follow the steps below to install DirectX 9. " Depending on the computer, this screen may not be displayed. [. . . ] ­ Leaving the casing in contact with rubber or vinyl objects for a long period of time. 1 While pressing on the tab, inset your fingernail into the slit to pull out the battery case. 2 Place a new battery with the + side facing up. 3 Insert the battery case back into the Remote Commander until it clicks. [. . . ]