User manual SONY DCR-IP220E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam. With your Handycam you can capture life's precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. [. . . ] * HOLOGRAM AF satisfies Class 1(time base 30 000 seconds) , specified in all of JIS (Japan) , IEC(EU) , and FDA(US) industry standards. Complying with these standards identifies the laser product to be safe, under a condition that a human looks at the laser light either directly or even through a lens for 30 000 seconds. A conversion lens (optional) may obstruct the HOLOGRAM AF light and make focusing difficult. If enough light does not reach the subject even if the HOLOGRAM AF emitter is emitted (recommended shooting distance is 2. 5 m (8 1/3 feet)), the subject will not be focused. Focusing may be hampered if the light emitted from the HOLOGRAM AF is blocked by an obstruction. Focus is achieved as long as HOLOGRAM AF light reaches to the subject even if its light is slightly out of the middle position of the subject. If HOLOGRAM AF light is dim, it sometimes becomes difficult to focus. If this happens, wipe the HOLOGRAM AF emitter with a soft, dry cloth. The NightFraming enables you to check a subject even at night and then record with natural colours using the flash. The and NIGHTFRAMING indicators flash, then and indicators light up on the LCD screen. While using NightFraming, you cannot use the following functions: ­ White balance ­ PROGRAM AE ­ Exposure ­ Flexible Spot Meter ­ Spot Focus ­ Continuous photo recording While using NightFraming: ­ Even if FOCUS is set to MANUAL, focus is automatically adjusted. ­ You see the subject in incorrect colours, but the recorded picture is in natural colours. You can record images on a "Memory Stick" with the self-timer. You can also use the Remote Commander for this operation. The self-timer starts counting down from 10 with a beep sound. In the last two seconds of the countdown, the beep sound gets faster, then recording starts automatically. You cannot cancel self-timer recording using the Remote Commander. ­ You turn NIGHTSHOT/NIGHTFRAMING to the other position while the self-timer is counting down. ­ The POWER switch is turned to the other position. Your camcorder can read moving picture data from other equipment recorded on a tape and record it as a still image on a "Memory Stick. " Your camcorder can also take in moving picture data from other equipment through the input connector and record it as a still image on a "Memory Stick. [. . . ] 8) 0 lx (lux) (in the NightShot mode)* * Objects unable to be seen due to the dark can be shot with infrared lighting. input/Output connectors Audio/Video input/output 10-pin connector Input/output auto switch Video signal: 1 Vp-p , 75 (ohms) , unbalanced , sync negative Luminance signal: 1 Vp-p , 75 (ohms) , unbalanced Chrominance signal: 0. 3 Vp-p, 75 (ohms), unbalanced Audio signal: 327 mV, (at output impedance more than 47 k (kilohms)) Input impedance with more than 47 k (kilohms) Output impedance with less than 2. 10 m (33 feet) (Open space, when using a Sony BTA-NW1/ NW1A Modem Adaptor with Bluetooth Function) Compatible Bluetooth profiles3) Generic Access Profile Dial-up Networking Profile Usable frequency band 2. [. . . ]