User manual SONY DCR-PC10

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. [. . . ] (6) Press SEARCH MODE on the Remote Commander repeatedly, until the title search indicator appears. (7) Press = or + to select the title for playback. Playback starts from the scene of the selected title automatically. You cannot superimpose or search a title, if you use a cassette tape without cassette memory. The camcorder may not search, if there is a blank portion between the recorded portions in the tape. You can search for the recorded still picture Photo Search function. there are two modes in Photo Search: · Using cassette memory, you can select the recorded date and time which is displayed on the LCD screen or in the viewfinder. You can also search for still pictures one after another and display each picture for five seconds automatically - Photo Scan function. Even if your tape has no cassette memory, you can use the Photo Scan function. You can only operate with the Remote Commander. Searching for a photo - photo search/photo scan Searching for a photo by using cassette memory You can use this function only when playing back a tape with cassette memory. (6) Press SEARCH MODE on the Remote Commander repeatedly, until the photo search indicator appears. Note When you play back a tape which has a blank portion between recorded portions, the Photo Search function will not work correctly . Searching for a photo - photo search/photo scan Searching for a photo without using cassette memory You can use this function whether the tape has cassette memory or not. (1) Set CM SEARCH to OFF in step 5 of "Searching for a photo by using cassette memory. " When using a tape without cassette memory, skip this step. (2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo search indicator appears. Each time you press = or +, the camcorder searches for the previous or next scene. You can use this function whether the tape has cassette memory or not. Each photos are played back for about 5 seconds automatically. Using the Remote Commander, you can easily go back to the desired point on a tape after playback. The tape stops automatically when the counter reaches approximately zero. [. . . ] 8 W during camera recording using LCD screen Operating temperature 32°F to 104°F (0°C to 40°C) Storage temperature ­4°F to 140°F (­20°C to 60°C) Dimensions Approx. 23) Make sure that the length of the tripod screw is less than 9/32 inch (6. Otherwise, you cannot attach the tripod securely and the screw may damage the camcorder. LINK" mark is a trademark of Sony Corporation and indicates that this product is in agreement with IEEE 1394-1995 specifications and their revisions. [. . . ]